Announcement

Collapse
No announcement yet.

Ball Wheel Belt Replacement by Masternut

Collapse

Adsense Classic 2

Collapse

Adsense Mobile 320x100 Left

Collapse
X
Collapse

  • Ball Wheel Belt Replacement by Masternut

    Courtesy of Masternut.


    • Blackdog
      #4
      Blackdog commented
      Editing a comment
      I have seen centers with no lift rod covers also, I have been afraid to try it myself. I am also curious about it. Let us know what's the gig?

    • Steve Stafford (JBEES)
      #5
      Editing a comment
      It is done when you are only using the rods as a guide. There are devices that attach to the ball wheel and lift the ball instead of the ball rolling on the wheel and lift rods. I have never been a big fan of them myself but I know those that swear by them.

      Here is the one I have seen and tried...
      http://www.ballcalleliminator.com/

      Watch their video and you will see that the ball does not touch the lift rods.

    • Blackdog
      #6
      Blackdog commented
      Editing a comment
      Thanks Steve, Merry Christmas to everyone!!!
    Posting comments is disabled.

Other Technical Articles

Collapse

  • ProTech
    Working Safely
    ProTech
    Just a reminder to work Safely !

    http://www.safetynewsalert.com/worke...ter-112k-fine/
    12-04-2011, 08:34 PM
  • PJ
    My luck ran out - ** Warning Graphic Content **
    PJ
    Was working senior league (full house) last Tuesday. Was having turn pan issues on lane 18. Reached in to get a pin off the track before ball came up. Got to close to cross conveyor belt. Felt my finger getting grabbed. Pulled back and lost the tip in the lower pulley. If I hadn't might have lost my whole finger. The night shift pinchaser found the tip on shaker board. The surgeon had to snip part of the bone off to be able to sew the skin and meat around the tip of the finger. No, I am not trying to be macho about...
    02-11-2012, 12:14 PM
  • 8270king
    King tip of the day - Chassis plugs
    8270king
    I use a wire tie rather than the nuts and U bolts to clamp wires on the C1 plugs.

    It is much quicker to get in if you have an issue - and I had a bad socket today on lane 1

    Just clip the wire tie and you are in

    When finished just re-install a wire tie





    ...
    04-06-2012, 10:12 AM
  • shamefowjze
    Cleaner Tank Filter Advice
    shamefowjze
    You can not use the brass filter in the cleaner. Lane cleaners are aggressive and corrodes the brass. It gets ugly real fast. Mike, This is what I do: 2 wraps of teflon tape on the fitting, then I hand screw that into the filter hand tight, Then I snug it with a wrench and channel locks about 1/8 of a turn. For the filter I use 2 wraps of telfon tape and a bead of silicone around the threads at the beginning of the threads. I then screw that into the tank hand tight. It's a low pressure application so there is no need to ...
    04-22-2012, 10:59 AM
  • clutchplate
    XLI Elevator Strips
    clutchplate
    Is it important to replace the grey riveted elevator strips? I know without it the elevator has a lot of play. Or is it mainly to dampen the sound.

    To see answers and the rest of this thread CLICK HERE
    04-28-2012, 12:55 PM
  • PinCup
    DMX512 lighting 101
    PinCup
    I'm once again sorting out and Cosmic Bowling light show that never worked or looked quite right. I am always amazed at what was a 'professional' install, where basic DMX rules are ignored. So, to help inform my BT brothers and sisters, I'll start a thread to help inform. Here's what I've learned over the years. What is DMX512 protocol? DXM lighting protocol is a system of controlling your light show. Used in night clubs, theater and stage productions, landscape accent, and by those crazy folks that put a million lights on their house for the holidays. DMX allows you to remote control intelligent and non-intelligent lighting fixtures. Now days, you can even control DMX from your smart phone. Control of a non-intelligent light fi...
    05-13-2012, 08:31 PM

Article Tags

Collapse

There are no tags yet.

Adsense Featured 2

Collapse

Latest Articles

Collapse

Working...
X