No announcement yet.

Open Score issues??


Adsense Classic 2


Adsense Mobile 320x100 Left


  • Open Score issues??

    Click image for larger version

Name:	doesntfit2.jpg
Views:	2
Size:	63.5 KB
ID:	1065799Last night was the first night I've used Openscore with multiple bowlers, we were in the 2nd or 3rd frame I think and the 3rd bowler threw a strike but it scored as a 9 or something so I went in and did a score correction and put in the strike but it was still on the 3rd bowler after the strike was put in. So I went to skip bowler to move the red bar down to the 4th bowler and everything was fine until the next frame when the 3rd bowler was up again. He threw his first ball and hit the button, it showed the pindication for what he left and then jumped to the 4th bowler without giving him any score in that frame. So again I manually score corrected his score but it kept skipping the 3rd bowler for the rest of the game.

    The second issue i'm having now is with my new computer that I just installed Openscore onto. The actual "text" for the scores looks a little wider than it did on my other computer and when it gets to a three digit score the numbers start to overlap into the next box of the scoregrid. I chatted with Jimmy and he said it sounds like an aspect ratio problem. I changed the resolution through windows and through the Openscore configuration but it does the same exact thing no matter what resolution its in. It almost looks as if the original computer was showing the text in a "condensed" looking font that fit fine and now this new computer looks like a normal width font that doesn't fit in the boxes. Here's a few pics to shown what I mean.

    Here's on the old computer where everything fits fine:

    Here's on the new computer where the text is too big:

    If anyone has run into this problem before or has any ideas on how to fit it let me know, the only thing I could think of is if the new computer doesn't have the same condensed font that the program needs but I would think the numbers in the program should be internal to the software and not dependent on a font that windows has.

    I also noticed on one of my old score pictures that the software didn't put a score in the 8th frame with a strike and the next two balls already being scored:
    Attached Files
      Posting comments is disabled.

    Other Technical Articles


    • ProTech
      Working Safely
      Just a reminder to work Safely !
      12-04-2011, 07:34 PM
    • PJ
      My luck ran out - ** Warning Graphic Content **
      Was working senior league (full house) last Tuesday. Was having turn pan issues on lane 18. Reached in to get a pin off the track before ball came up. Got to close to cross conveyor belt. Felt my finger getting grabbed. Pulled back and lost the tip in the lower pulley. If I hadn't might have lost my whole finger. The night shift pinchaser found the tip on shaker board. The surgeon had to snip part of the bone off to be able to sew the skin and meat around the tip of the finger. No, I am not trying to be macho about...
      02-11-2012, 11:14 AM
    • 8270king
      King tip of the day - Chassis plugs
      I use a wire tie rather than the nuts and U bolts to clamp wires on the C1 plugs.

      It is much quicker to get in if you have an issue - and I had a bad socket today on lane 1

      Just clip the wire tie and you are in

      When finished just re-install a wire tie

      04-06-2012, 09:12 AM
    • shamefowjze
      Cleaner Tank Filter Advice
      You can not use the brass filter in the cleaner. Lane cleaners are aggressive and corrodes the brass. It gets ugly real fast. Mike, This is what I do: 2 wraps of teflon tape on the fitting, then I hand screw that into the filter hand tight, Then I snug it with a wrench and channel locks about 1/8 of a turn. For the filter I use 2 wraps of telfon tape and a bead of silicone around the threads at the beginning of the threads. I then screw that into the tank hand tight. It's a low pressure application so there is no need to ...
      04-22-2012, 09:59 AM
    • clutchplate
      XLI Elevator Strips
      Is it important to replace the grey riveted elevator strips? I know without it the elevator has a lot of play. Or is it mainly to dampen the sound.

      To see answers and the rest of this thread CLICK HERE
      04-28-2012, 11:55 AM
    • PinCup
      DMX512 lighting 101
      I'm once again sorting out and Cosmic Bowling light show that never worked or looked quite right. I am always amazed at what was a 'professional' install, where basic DMX rules are ignored. So, to help inform my BT brothers and sisters, I'll start a thread to help inform. Here's what I've learned over the years. What is DMX512 protocol? DXM lighting protocol is a system of controlling your light show. Used in night clubs, theater and stage productions, landscape accent, and by those crazy folks that put a million lights on their house for the holidays. DMX allows you to remote control intelligent and non-intelligent lighting fixtures. Now days, you can even control DMX from your smart phone. Control of a non-intelligent light fi...
      05-13-2012, 07:31 PM

    Article Tags


    There are no tags yet.

    Adsense Featured 2


    Latest Articles