Announcement

Collapse
No announcement yet.

Lane Maintenance

Collapse

Adsense Classic 2

Collapse

Adsense Mobile 320x100 Right

Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • Cleaner Tank Filter Advice

    Cleaner Tank Filter Advice

    You can not use the brass filter in the cleaner. Lane cleaners are aggressive and corrodes the brass. It gets ugly real fast. Mike, This is what I do: 2 wraps of teflon tape on the fitting, then I hand screw that into the filter hand tight, Then I snug it with a wrench and channel locks about 1/8 of a turn. For the filter I use 2 wraps of telfon tape and a bead of silicone around the threads at the beginning of the threads. I then screw that into the tank hand tight. It's a low pressure application so there is no need to ...
    See more | Go to post

  • Walker Mod by Kanga

    Walker Mod by Kanga



    Click HERE to see Kanga's Pictures...
    See more | Go to post

  • Old Brunswick Stamp

    Old Brunswick Stamp

    This lane is still in use and has not been resurfaced since 1970...
    See more | Go to post

  • Starting the overlays with pictures

    Starting the overlays with pictures

    Ok as promised Day 2 of the overlays. Not much happening finishing sanding the lanes.


    These pics are at the dots on the heads. Put 2 extra 6" lane screws on the 13th boards of each side, every other stringer on the foundation. Also notice some of the dots are gone, also have some red dots, and hitting nails. These last 2 pics are the thickness of one of the lanes. The first one is the pine area and the second is the maple area. As you can see getting close to the tongue and groove. These lanes are about 25yrs. old don't know exactly though. Wh...
    See more | Go to post
There are no articles in this category.
  • Filter
  • Time
  • Show
Clear All
new posts
Please log in to your account to view your subscribed posts.

Latest Articles

Collapse

  • Legends Pin Deck Treatment Product Infomation Request
    megatron
    I've been searching for a while now for more information about Legends Pin Deck Treatment, but I can't find anything.The directions on the spray bottle say not to over apply, but what is the normal amount
    05-18-2015, 10:00 PM
  • machine cycles when gutter thrown on opposite lane
    Ted
    [ATTACH=CONFIG]5940[/ATTACH]I've also seen this happen when the AMF detector head is mounted solid on the nose of the kickback, and in mode '0'. The vibration of the kickback seems to jolt the electronics enough to cause cycling
    10-29-2013, 03:39 PM
  • A Project
    Tablejam
    So many years ago we had a remodel. This is lane 50 with a walkway next to it. Prior to the remodel this house was 60 lanes straight across. The last 10 lanes were covered up and a wall built on lane
    09-18-2013, 09:00 PM
  • Installed Used Synthetic Pin Decks
    don805
    [ATTACH=CONFIG]5642[/ATTACH][ATTACH=CONFIG]5656[/ATTACH][ATTACH=CONFIG]5657[/ATTACH][ATTACH=CONFIG]5658[/ATTACH][ATTACH=CONFIG]5659[/ATTACH][ATTACH=CONFIG]5660[/ATTACH][ATTACH=CONFIG]5661[/ATTACH][ATTACH=CONFIG]5662[/ATTACH][ATTACH=CONFIG]5663[/ATTACH][ATTACH=CONFIG]5664[/ATTACH][ATTACH=CONFIG]5665[/ATTACH][ATTACH=CONFIG]5655[/ATTACH][ATTACH=CONFIG]5654[/ATTACH][ATTACH=CONFIG]5653[/ATTACH][ATTACH=CONFIG]5643[/ATTACH][ATTACH=CONFIG]5644[/ATTACH][ATTACH=CONFIG]5645[/ATTACH][ATTACH=CONFIG]5646[/ATTACH][ATTACH=CONFIG]5647[/ATTACH][ATTACH=CONFIG]5648[/ATTACH][ATTACH=CONFIG]5649[/ATTACH][ATTACH=CONFIG]5650[/ATTACH][ATTACH=CONFIG]5651[/ATTACH][ATTACH=CONFIG]5652[/ATTACH][ATTACH=CONFIG]5666[/ATTACH]

    We just spent two days removing our old wooden pin decks and installing synthetic decks
    08-25-2013, 11:52 PM
  • Replacing Kickback?
    Ted
    [ATTACH=CONFIG]5324[/ATTACH][ATTACH=CONFIG]5325[/ATTACH]Build a rigid support for the torque tube. This one is 1/4" short of the measurement. I use door shims to snug it to the proper height as i go across the house replacing kickbacks.
    07-20-2013, 12:29 AM
  • Gold Crown Masking Units & Crown Imperial Ball Return Installed Pics
    MattC
    More detailed photos of my LED pinfinder system.

    The LED controller circuit board receives a switch closure from each of the pin switches on the moving deck and latches the corresponding
    07-02-2013, 03:11 PM

Adsense Tower Right

Collapse
Working...
X