Announcement

Collapse
No announcement yet.

Lane Maintenance

Collapse

Adsense Classic 2

Collapse

Adsense Mobile 320x100 Left

Collapse
Sorry, you are not authorized to view this page
widgetinstance 481 (Other Technical Articles) skipped due to lack of content & hide_module_if_empty option.

Article Tags

Collapse

There are no tags yet.

Adsense Featured 2

Collapse

Latest Articles

Collapse

  • Legends Pin Deck Treatment Product Infomation Request
    megatron
    I've been searching for a while now for more information about Legends Pin Deck Treatment, but I can't find anything.The directions on the spray bottle say not to over apply, but what is the normal amount
    05-18-2015, 10:00 PM
  • machine cycles when gutter thrown on opposite lane
    Ted
    [ATTACH=CONFIG]5940[/ATTACH]I've also seen this happen when the AMF detector head is mounted solid on the nose of the kickback, and in mode '0'. The vibration of the kickback seems to jolt the electronics enough to cause cycling
    10-29-2013, 03:39 PM
  • A Project
    Tablejam
    So many years ago we had a remodel. This is lane 50 with a walkway next to it. Prior to the remodel this house was 60 lanes straight across. The last 10 lanes were covered up and a wall built on lane
    09-18-2013, 09:00 PM
  • Installed Used Synthetic Pin Decks
    don805
    [ATTACH=CONFIG]5642[/ATTACH][ATTACH=CONFIG]5656[/ATTACH][ATTACH=CONFIG]5657[/ATTACH][ATTACH=CONFIG]5658[/ATTACH][ATTACH=CONFIG]5659[/ATTACH][ATTACH=CONFIG]5660[/ATTACH][ATTACH=CONFIG]5661[/ATTACH][ATTACH=CONFIG]5662[/ATTACH][ATTACH=CONFIG]5663[/ATTACH][ATTACH=CONFIG]5664[/ATTACH][ATTACH=CONFIG]5665[/ATTACH][ATTACH=CONFIG]5655[/ATTACH][ATTACH=CONFIG]5654[/ATTACH][ATTACH=CONFIG]5653[/ATTACH][ATTACH=CONFIG]5643[/ATTACH][ATTACH=CONFIG]5644[/ATTACH][ATTACH=CONFIG]5645[/ATTACH][ATTACH=CONFIG]5646[/ATTACH][ATTACH=CONFIG]5647[/ATTACH][ATTACH=CONFIG]5648[/ATTACH][ATTACH=CONFIG]5649[/ATTACH][ATTACH=CONFIG]5650[/ATTACH][ATTACH=CONFIG]5651[/ATTACH][ATTACH=CONFIG]5652[/ATTACH][ATTACH=CONFIG]5666[/ATTACH]

    We just spent two days removing our old wooden pin decks and installing synthetic decks
    08-25-2013, 11:52 PM
  • Replacing Kickback?
    Ted
    [ATTACH=CONFIG]5324[/ATTACH][ATTACH=CONFIG]5325[/ATTACH]Build a rigid support for the torque tube. This one is 1/4" short of the measurement. I use door shims to snug it to the proper height as i go across the house replacing kickbacks.
    07-20-2013, 12:29 AM
  • Gold Crown Masking Units & Crown Imperial Ball Return Installed Pics
    MattC
    More detailed photos of my LED pinfinder system.

    The LED controller circuit board receives a switch closure from each of the pin switches on the moving deck and latches the corresponding
    07-02-2013, 03:11 PM
Working...
X