No announcement yet.

King tip of the day - Chassis plugs


Adsense Classic 2


Adsense Mobile 320x100 Left


  • King tip of the day - Chassis plugs

    I use a wire tie rather than the nuts and U bolts to clamp wires on the C1 plugs.

    It is much quicker to get in if you have an issue - and I had a bad socket today on lane 1

    Just clip the wire tie and you are in

    When finished just re-install a wire tie

      Posting comments is disabled.
    widgetinstance 481 (Other Technical Articles) skipped due to lack of content & hide_module_if_empty option.

    Article Tags


    There are no tags yet.

    Adsense Featured 2


    Latest Articles


    • Wyse Terminal Funcion Key setup
      by deb
      The attached PDF gives instructions for setting up the functions keys for a Wyse terminal.

      If you're running AccuDesk with AccuScore Plus you'll definitely want to learn how to do this....
      02-05-2014, 08:32 AM
    • National Combo Gearbox Case Repair
      by BulldogMike
      [ATTACH=CONFIG]5392[/ATTACH]I had a couple of National Combo gearboxes that had cracks in the bearing seat. Eric @ Stahls made a plate and machined out the old part. It has been running for a couple of months without issue.
      08-02-2013, 10:06 PM
    • Converting To Expanders
      by 8270king
      07-30-2013, 08:47 AM
    • Sloppy pinwheels xli
      by Fred H
      [ATTACH=CONFIG]5330[/ATTACH]I add an extra nylon washer behind the rollers to take most of the slop out
      07-19-2013, 11:32 PM
    • 82-30 6525 chassis sweep contactor chattering
      by toon30s
      I have a chassis that the sweep contactor chatters on when it starts a cycle. Chassis problem, not in the machine. This is an OmegaTek conversion. I have had this chassis on my machine for 3 weeks
      07-02-2013, 02:44 PM
    • kidney rail assy, check it out
      by Pin_Head

      These are the pics of it TJ I couldnt get the video to work for some stupid reason, they come with 3 nice bushings so you don't need a shoulder bolt, any standard 5/16"
      07-01-2013, 09:42 PM