|
|
|
Pinsetters Brunswick
|
|
Never recveived a copy...
|
|
Pinspotters AMF
|
|
Besides rebuilding that assembly, you can try spraying WD40 on the latch bushings, gently tap it with a hammer a few times, and manually operate it seceral times to work the lube in there and free it up. Usually the bushings dry up and they get stic
|
|
Pinspotters AMF
|
|
I am afraid to weld anything, its just scary and I'm not that good at it anyway. For me, because of the fear factor and the potential danger, I just don't weld.
|
|
Pinsetters Brunswick
|
|
cool. good one. I see it now on the middle arm. Goood quick fix. You got lucky on that one that you had enough of the arm still attached to the main part of the toggle lever to do what you did. On a side note, I started wondering if the scissor spr
|
|
Pinsetters Brunswick
|
|
That was an actual LOL!
|
|
Pinsetters Brunswick
|
|
I just knew that information would come in handy to someone.. Hope this solves your problem. Of course the Poly-Vee Kits come with a 1" pulley, the 1 5/8" pulley is 53-520159-000 Poly V Sheave (1-5/8" Dia.) They are not cheap either..
|
|
Brunswick GS Pinsetters
|
|
I'm off till saturday night. I'll check what I can then.
|
|
Pinsetters Brunswick
|
|
I think the new Bruns CC belts are good now since they came up with the latest design but I'm wondering if they use silicone release agent during molding because the first set I ever got, I had problems with after cleaning with ST-21 (never happens)
|
|
Pinspotters AMF
|
|
thank u bill. checked shaft, doesn't look bent. i'm looking closer to see what i can find. wondering if maybe latch itself bent??? but I can't see that happening. although ya never know
|
|
Pinspotters AMF
|
|
Hey thanks for all the replies !! I am always concerned with the geometry of the parts....
|
|
Pinspotters AMF
|
|
Originally Posted By: allensummittOriginally Posted By: ScttHrvyI wrap the cushion with old carpet material and lace it at the top, thru the curtain. Takes care of exposed rivet problems plus acts as a nice "container" for broken rivets and
|
|
Pinspotters AMF
|
|
Looks like Bowling Factory Outlet has one out also.
|
|
AMF Scoring Systems Discussion
|
|
I was thinking maybe its a bad CWC or even bad boards in your chassis? But im also intrested to see the end result to this problem.
|
|
AMF Scoring Systems Discussion
|
|
Hey ted: Thanks! that is exactly what we needed. One more question from the newbie. Sorry this is really all new to us and trying to do what we can on our own to learn it all. You mentioned the SS going to the switch on the R side of the machine so t
|
|
New Members Only
|
|
thanx ted when is comes to gsx's there is not a lot i dont know i only been working with them for two years but i do not know every thing i am still learning new stuff here and there as it happens.
|
|
Lane Maintenance
|
|
Nick: Engine turning would probably be a little busy, right in front of the bowlers. I'd go with what you have, they look great. Roscoe
|
|
Help Wanted
|
|
Seeking a B or C mechanic for 82-70's in Palatka, Florida. Willing to train. Please call Putnam Lanes at 386-325-8795. Ask for Bill or Ray
|
|
Lane Conditioning & Cleaning Machines Maintenance
|
|
I would set the unwind time to 9 or 10 when you install a new roll. This should solve your problem, however you will use more cloth than before.
|
|
HVAC & Refrigeration
|
|
http://www.motherearthnews.com/Do-It-Yourself/1984-01-01/Solar-Water-Heater.aspx More on the style I was thinking of. http://www.builditsolar.com/Projects/SpaceHeating/Glazing.htm Some info on glazing here. http://www.builditsolar.com/Projects/WaterH
|
|
Safety
|
|
We clean the foul lines, 10 inches from the line itself and clear it from oil, we sign off to say we've done it, so that if anyone does slip, we can take photos showing that we've followed procedure. We had one woman fall over half way down a lane,
|
|
AMF Scoring Systems Discussion
|
|
Originally Posted By: TedBy the way, didn't I install that? booty coveing Ted JUST HAD TO
|
|
Pinspotters AMF
|
|
ugh... a 70 looks so pretty without my guarding
|
|
Pinspotters AMF
|
|
Mark, This is the reason why I was sent these belts, Ive had a lane chew up 2 backend stator motors. The belt that was on did seem a bit tight so I changed it for a longer one in hopes that it will stop it. If not then im guessing its a collapsed bea
|
|
Electrical & Electronics Discussion
|
|
Mike, here is a thread where a few options were offered. Ice cube relay options http://www.bowltech.com/content/btubb/ubbthreads.php?ubb=showflat&Number=388871&Searchpage=1&Main=40528&Words=%22ice+cube%22+realys&Search=true#Pos
|
|
New Members Only
|
|
Welcome to BowlTech! The A-2's are wonderful machines; and the guys here are the best!!
|
