Announcement

Collapse
No announcement yet.

Magic Score Question [odd behavior]

Collapse

Adsense Classic 1

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Magic Score Question [odd behavior]

    Hi, We have a 24 lane magic score system that works great. A sort of weird thing has been happening now and again. Sometimes, when removing the scores in league mode, the scoring arrows only come back up on one lane of the pair. This has been happening to us during some tournament events where a squad bowls in the morning (with no problem), the lanes are switched off and then back on in league mode, for the second squad. During the 2nd squad, a couple of lane pairs (out of 12) have this problem. Arrows only come up on one lane. You can get the other arrows to come up by pushing the bowler button--and this is what we have to do. But something is going on and I would like to figure it out.

    We have the single board lane pair system, with an Advantage-lite back office computer. The lane pairs are running the 1.07 software version. This problem doesn't seem specific to particular lane pairs--just here and there across the house.

    Does anyone remember anything like this when they had or still have Magic Score.

    Thanks,
    Greg Laird
    Northgate Bowl
    Salem, OR

Adsense Classic 2

Collapse
 

Preventative Maintenance - Brunswick A, Jets, A2 - Wiring Problems

Had to do a service call at a friend's center as he was out of town. Seems Accelerator on 5 & 6 had quit. Breaker, (which fed 3 pairs), had not tripped, ohm check on motor...
 

Pins getting gouged

Has anyone ever had this problem of the pins getting gouged?
I have one lane pair that is just chewing the pins up. There is nothing visibly sticking out on either lane...
 

Preventative Maintenance - A Jets A2 - Pinsetter Procedures

Over the years I've compiled info in a 3-ring binder for quick reference. I decided to add a bunch to it and make one for a few of my friends including the rear-wall house. ...
 

Need Pinout for J2 & J22 (Masking unit)

Hi Guys!
I need some help. We're installing custom Masking units at a new location in PDX. Our sister center in Beaverton, OR has ZOT/ Horizon Ball indicator PCB's for the...
 

Cracked Moving Deck

I have a couple of pinsetters that have a cracked moving deck and I would like to replace them before leagues start. I have some spares that I can put in but I don't know how...
Working...
X