No announcement yet.

AMF Communications Connector


Adsense Classic 1

  • Filter
  • Time
  • Show
Clear All
new posts

  • AMF Communications Connector

    Good evening. I've been tasked to replace some connectors at a local bowling alley and I'm trying to find a PN for them. I've been in the communication industry for over 30 years and have yet to see anything like this. Hopefully someone will recognize it. Thank you. Phil

  • #2
    Is that the cable that plugs into the MCU? Per Ted's reply in another post, it is called an SDL connector. I was troubleshooting our MCU recently and had a "what the heck is this?" moment when I checked the cabling.


    • #3
      Holy Moses! Thank you DBZodos! You've unlocked the last piece of the puzzle! I checked out the thread and you are correct, it's an SDL connector. In the process of locating a TE or Amp PN, once I find it and pricing I'd like to add to this thread just in case someone else may have the same issue...Cheers! Phil


      Topic Starter RibbonScript


      Adsense Classic 2


      Related Topics



      Preventative Maintenance - A Jets A2 - Elevator & Pits

      All this work just to clean under the elevator !!??? LOL A friend is replacing a number of his elevators as the left hand triangle plate brackets are breaking. Rather than...

      Preventative Maintenance - A Jets A2 - Ball Wheel Belt Question

      A friend was looking at his ball wheel belt which stated it was 208" long, (Pic 1). He was pretty sure that it is a B205 belt which should be 205" long. The answer...


      my appologies if Ive posted this in the wrong area, this is my second post on this site, Ive got a 10 lane center ( 5 pairs ) and on lanes 3&4, I am having a problem with...

      Pin spot is off

      I'm currently working at a 38 Lane center. Of those 38 lanes only a few are having this issue.

      I'm currently trying to get all the lanes to have perfect pin spots...

      Idler shaft

      One of our lanes has a bad bearing assembly for the distributor pulley. The idler shaft that the pulleys sit on has been damaged where it sits on the bearing. I took the assembly...