Announcement

Collapse
No announcement yet.

GSX Vector scoring shows the nine pin on second ball

Collapse

Adsense Classic 1

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • GSX Vector scoring shows the nine pin on second ball

    One of my lanes keeps miss scoring the second ball. I printed the score sheet and it looks like the nine pin reads every time on second ball. I have replaced the I/O board and the main CPU in the nextgen box. Also checked the pinholder to make sure it wasn't the problem. Anybody have any thoughts? It would be greatly appreciated.

  • #2
    Table hight, missing shimms, wirering?

    Comment


    • #3
      Thanks, we checked everything. Turns out it was a bad connection at the table cable.

      Comment

      Adsense Classic 2

      Collapse
       

      Preventative Maintenance - Brunswick All - Bearing Life

      In relation to the recent “B Shaft” failure, I thought I would throw this subject on the table for discussion. I remember when I attended a “Bearing Life” seminar long...
       

      Preventative Maintenance Brunswick A Jets A2 - SC/Dk Pulley Assembly

      Found a bad left needle bearing in the Scissor / Deck Cable Assembly at the Rear Wall House. Needle Bearings are falling out and there is a pile of metal under it. Been 30+...
       

      Preventative Maintenance - Brunswick B-10's Hollar House

      Took a trip back in time to the classic “Hollar House”. The lanes went in in 1908. There was no ABC but according to the current operator, Tom, it became sanctioned when...
       

      Table support assembly

      My night at part job all 32 lanes going of leagues no where to move. Table support assembly broke rod broke # 2 Cell and bent the heck out of wire channel. Changed the Cell,...
       

      Foul Light LED Mod

      Here is a mod I came up with for a foul light unit. I was able to remove the old indicator light bulbs and replace them with ultra bright white LEDs. This should work for about...
      Working...
      X