Announcement

Collapse
No announcement yet.

Vector scoring

Collapse

Adsense Classic 1

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Vector scoring

    will vector scoring work with 82-70s 5 board chassis

  • #2
    not sure what a 5 board chassis is. BUT i do know of 82-70s using Vector just fine.

    Comment


    • #3
      It will work fine. But If you wanted to upgrade the chassis for quick strike and sweep reverse (like MP or omega tech), you'll need a cable from the camera to each chassis. They can be done a pair at a time.
      .
      .
      .
      This post is not an unpaid promotion of my business.

      Comment


      • #4
        Vector will connect to your managers control, and reset circuits inside the MC box.
        There will be a seperate cable from your foul lights to the Vector camera.

        Comment

        Adsense Classic 2

        Collapse

        Related Topics

        Collapse

         

        Detector Rod Adjustment

        I am currently doing my first detector rod adjustment. The first thing the book tells you to do is adjust the gap between the oor controller and the blocking surface on the detector...
         

        The New Brunswick NXT

        Best Pinsetter on the market today
         

        Distributor Repair Kit

        Has anyone installed a dist. repair kit ? Wanted to know if its a fix to the problem or just a brunswick brand Band-Aid....
         

        Preventative Maintenance - Brunswick A, Jets, A2 - Wiring Problems

        Had to do a service call at a friend's center as he was out of town. Seems Accelerator on 5 & 6 had quit. Breaker, (which fed 3 pairs), had not tripped, ohm check on motor...
         

        Preventative Maintenance - A Jets A2 - Pinsetter Procedures

        Over the years I've compiled info in a 3-ring binder for quick reference. I decided to add a bunch to it and make one for a few of my friends including the rear-wall house. ...
        Working...
        X