Announcement

Collapse
No announcement yet.

Changing from 19" to 21" uppers

Collapse

Adsense Classic 1

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Changing from 19" to 21" uppers

    ok everyone here is the issue i am having. I recently had two uppers go out at my house of 8 lanes. I found a guy selling some so i went and picked them up. Ended up they were 21" monitors and i have 19". I ended up buying two complete upper sets from him. Went to install them and seen they are not a direct plug and play. I assume they changed a few things on them. So now i need to know what do i need to do to make this work.

    I have already figured out the two coax cables
    and the two smaller single cables.

    I need to know where the other three cables go.

    Any and all help is great.

    Thanks in advanced

Adsense Classic 2

Collapse

Related Topics

Collapse

 

Detector Rod Adjustment

I am currently doing my first detector rod adjustment. The first thing the book tells you to do is adjust the gap between the oor controller and the blocking surface on the detector...
 

The New Brunswick NXT

Best Pinsetter on the market today
 

Distributor Repair Kit

Has anyone installed a dist. repair kit ? Wanted to know if its a fix to the problem or just a brunswick brand Band-Aid....
 

Preventative Maintenance - Brunswick A, Jets, A2 - Wiring Problems

Had to do a service call at a friend's center as he was out of town. Seems Accelerator on 5 & 6 had quit. Breaker, (which fed 3 pairs), had not tripped, ohm check on motor...
 

Preventative Maintenance - A Jets A2 - Pinsetter Procedures

Over the years I've compiled info in a 3-ring binder for quick reference. I decided to add a bunch to it and make one for a few of my friends including the rear-wall house. ...
Working...
X