Announcement

Collapse
No announcement yet.

Brunswick Server is down, need help with stand alone setup

Collapse

Adsense Classic 1

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Brunswick Server is down, need help with stand alone setup

    I have a server running Vector Plus that won't get past the initial info screen. Won't boot to windows. Does anyone know how to set up stand alone mode? We have an event tomorrow and need some kind of automated scoring. Thanks in advance

  • #2
    you can do stand alone from the consoles .... hopefully you do have consoles. the manual should have the proper number sequence to input and access

    Comment

    Adsense Classic 2

    Collapse

    Related Topics

    Collapse

     

    Preventative Maintenance Brunswick A Jets A2 - Pin Light Conversion

    Rear Wall House was having a big problem with the pin lights. The ends were pretty much worn out from the vibration so duct tape, electrical tape and jiggling the light would...
     

    Detector Rod Adjustment

    I am currently doing my first detector rod adjustment. The first thing the book tells you to do is adjust the gap between the oor controller and the blocking surface on the detector...
     

    The New Brunswick NXT

    Best Pinsetter on the market today
     

    Distributor Repair Kit

    Has anyone installed a dist. repair kit ? Wanted to know if its a fix to the problem or just a brunswick brand Band-Aid....
     

    Preventative Maintenance - Brunswick A, Jets, A2 - Wiring Problems

    Had to do a service call at a friend's center as he was out of town. Seems Accelerator on 5 & 6 had quit. Breaker, (which fed 3 pairs), had not tripped, ohm check on motor...
    Working...
    X