Announcement

Collapse
No announcement yet.

AS90 CCD processor box lights

Collapse

Adsense Classic 1

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • AS90 CCD processor box lights

    Is there a guide somewhere to know what the red LED lights indicate on the CCD camera processor box. It would be nice to know if I can correct the issue myself .Thanks

  • #2
    From what ive seen is all lite LEDs is a bad board, bad clock or bad video cable. 1 LED lite means need to be calibrated and also with new version on ccd boards after installing a new or repaired board you will also get 1 LED lite after calibration and you need to throw 2 gutter balls on left lane. Then it will go away.
    Im sure somebody will post more.

    Comment

    Adsense Classic 2

    Collapse

    Related Topics

    Collapse

     

    Detector Rod Adjustment

    I am currently doing my first detector rod adjustment. The first thing the book tells you to do is adjust the gap between the oor controller and the blocking surface on the detector...
     

    The New Brunswick NXT

    Best Pinsetter on the market today
     

    Distributor Repair Kit

    Has anyone installed a dist. repair kit ? Wanted to know if its a fix to the problem or just a brunswick brand Band-Aid....
     

    Preventative Maintenance - Brunswick A, Jets, A2 - Wiring Problems

    Had to do a service call at a friend's center as he was out of town. Seems Accelerator on 5 & 6 had quit. Breaker, (which fed 3 pairs), had not tripped, ohm check on motor...
     

    Preventative Maintenance - A Jets A2 - Pinsetter Procedures

    Over the years I've compiled info in a 3-ring binder for quick reference. I decided to add a bunch to it and make one for a few of my friends including the rear-wall house. ...
    Working...
    X