Announcement

Collapse
No announcement yet.

Camera issue

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • wepauls
    replied
    Originally posted by Brianlah View Post
    Replace that cable
    ASIDE FROM THAT CHECK WIR GOING CWC TO CAMERA FOR A PINCHED WIR

    Leave a comment:


  • Brianlah
    replied
    Replace that cable

    Leave a comment:


  • jbl
    started a topic Camera issue

    Camera issue

    Vector plus scoring. Camera on one pair looses image and get a can not connect to camera message at front desk. Its not the camera or the the camera board they were moved to another lane and work fine. I can get the camera to come back online by disconnecting the camera wire at the connector on the right side of the box on the curtain wall and re connecting it. Any ideas on what to do next?

Topic Starter RibbonScript

Collapse

Adsense Classic 2

Collapse

Related Topics

Collapse

 

Help-broken Part

my crew was clearing a pin jam when the part fell on to the pin-deck. no enough experience to know where this is or what it's called. looking for help so we can order the part...
 

Qubica VDB Battery Replacement Part 2.

Greeting all.
I am sharing a link for a video, part 2, on how I replaced the battery in a Qubica VDB unit.
Thanks for looking.
Bolton454
 

Pin Damage

I have GSX pinsetters just over one year old. Just one of my machines is causing this damage to my pins. I have already adjusted the pin deflector boards to cover the bottom bolts...
 

Making TDM's adjustable.

I have some machines that the time delay cycles like right now when machine is triggered instead of the 3 sec delay. Would like to put in a potentiameter to correct this. Does...
 

1:1 shaft wear

Hi all....I have a pinsetter that knocks over pins at times when setting new pins. The moving deck shifts very abruptly right around 270 degrees. Instead of a smooth movement,...
Working...
X