Announcement

Collapse
No announcement yet.

Unable to load user profile - Windows 7 Professional

Collapse

Adsense Classic 1

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Unable to load user profile - Windows 7 Professional

    So, we came this issue on Monday morning where one of our computers is "unable to load user profile".

    The problem is, this is our main pc (or server) for the centre.

    The centre still runs fine, all the pc's are connected and so are the Matrix's. As long as the computer is left on.

    Have watched 3 videos on youtube, detailing step-by-step instructions on how to resolve this "unable to load profile" issue, however, I feel a little sceptical that by doing this will reset the directories and files thus making comscore useless.

    Please help!

  • #2
    In windows 7 you should be able to use system restore in safe mode to restore to a previous store point to go back to a time the system was working properly. This of course depends on how you manage your restore points. This won't change your files.

    Comment

    Adsense Classic 2

    Collapse
     

    Preventative Maintenance - Brunswick A, Jets, A2 - Wiring Problems

    Had to do a service call at a friend's center as he was out of town. Seems Accelerator on 5 & 6 had quit. Breaker, (which fed 3 pairs), had not tripped, ohm check on motor...
     

    Pins getting gouged

    Has anyone ever had this problem of the pins getting gouged?
    I have one lane pair that is just chewing the pins up. There is nothing visibly sticking out on either lane...
     

    Preventative Maintenance - A Jets A2 - Pinsetter Procedures

    Over the years I've compiled info in a 3-ring binder for quick reference. I decided to add a bunch to it and make one for a few of my friends including the rear-wall house. ...
     

    Need Pinout for J2 & J22 (Masking unit)

    Hi Guys!
    I need some help. We're installing custom Masking units at a new location in PDX. Our sister center in Beaverton, OR has ZOT/ Horizon Ball indicator PCB's for the...
     

    Cracked Moving Deck

    I have a couple of pinsetters that have a cracked moving deck and I would like to replace them before leagues start. I have some spares that I can put in but I don't know how...
    Working...
    X