No announcement yet.

Mendes Consoles


Adsense Classic 1

  • Filter
  • Time
  • Show
Clear All
new posts

  • Mendes Consoles

    we are trying to get a community bowling center back up.
    We had a few problems, and sorted most. We had a bowling equipment mechanic come over and do everything that was needed but he could not help with this problem.
    after changing the hard drive with a spare we had, the consoles boot but they remain at what seems to be the first screen, it looks a bit like a tv calibration screen with a rotating mendes logo in the center.
    I see the system initializing network with adress,and my pc has ip
    The mendes tcp ip server is started but i only get a socket closed error message.
    pc and console cant communicate together.
    I checked the cable.
    Anybody with experience on mendes scorgin system can help ?


Topic Starter RibbonScript


Adsense Classic 2


Related Topics


  • Guest's Avatar
    Mendes Bankrupt?
    by Guest
    I was told today by my assisant manager that MENDES has gone belly-up. Has anyone heard anything and why? Since I have their scorers in my center, and we also have a house that...
    10-11-2000, 05:23 PM
  • PinCup
    Mendes help
    by PinCup
    Looking for the install guide, schematics, repair manual, or anything that is related to the Mendes system.

    The front desk version# is 3.1c Build# 3137k if that...
    04-26-2011, 09:45 PM

Preventative Maintenance - A Jets A2 - Elevator & Pits

All this work just to clean under the elevator !!??? LOL A friend is replacing a number of his elevators as the left hand triangle plate brackets are breaking. Rather than...

Preventative Maintenance - A Jets A2 - Ball Wheel Belt Question

A friend was looking at his ball wheel belt which stated it was 208" long, (Pic 1). He was pretty sure that it is a B205 belt which should be 205" long. The answer...


my appologies if Ive posted this in the wrong area, this is my second post on this site, Ive got a 10 lane center ( 5 pairs ) and on lanes 3&4, I am having a problem with...

Pin spot is off

I'm currently working at a 38 Lane center. Of those 38 lanes only a few are having this issue.

I'm currently trying to get all the lanes to have perfect pin spots...

Idler shaft

One of our lanes has a bad bearing assembly for the distributor pulley. The idler shaft that the pulleys sit on has been damaged where it sits on the bearing. I took the assembly...