No announcement yet.

Steltronic to flat screen conversion


Adsense Classic 1

  • Filter
  • Time
  • Show
Clear All
new posts

  • Steltronic to flat screen conversion

    Gentlemen, my old crt screens are giving up. I thought i had a solution. Ambery av-1m converter and home made cable to go from elex 9 pin to 15 pin input of ambery converter. Then vga cable out to flatscreen.

    I have picture but it flickers like noise in the line or something? Gets worse if you plug other lane in.

    Any suggestions or pin out on cable so i can verify?



  • #2
    Here is a link to the diagram of the cables and parts necessary to connect the Steltronic WINS hardware to a flat screen LED/LCD monitor.
    Jim Osdale
    Steltronic USA


    • #3
      Jim Osdale
      Steltronic USA


      Adsense Classic 2


      Related Topics



      Preventative Maintenance Brunswick A Jets A2 - Pin Light Conversion

      Rear Wall House was having a big problem with the pin lights. The ends were pretty much worn out from the vibration so duct tape, electrical tape and jiggling the light would...

      Detector Rod Adjustment

      I am currently doing my first detector rod adjustment. The first thing the book tells you to do is adjust the gap between the oor controller and the blocking surface on the detector...

      The New Brunswick NXT

      Best Pinsetter on the market today

      Distributor Repair Kit

      Has anyone installed a dist. repair kit ? Wanted to know if its a fix to the problem or just a brunswick brand Band-Aid....

      Preventative Maintenance - Brunswick A, Jets, A2 - Wiring Problems

      Had to do a service call at a friend's center as he was out of town. Seems Accelerator on 5 & 6 had quit. Breaker, (which fed 3 pairs), had not tripped, ohm check on motor...