No announcement yet.

Steltronic to flat screen conversion


Adsense Classic 1

  • Filter
  • Time
  • Show
Clear All
new posts

  • Steltronic to flat screen conversion

    Gentlemen, my old crt screens are giving up. I thought i had a solution. Ambery av-1m converter and home made cable to go from elex 9 pin to 15 pin input of ambery converter. Then vga cable out to flatscreen.

    I have picture but it flickers like noise in the line or something? Gets worse if you plug other lane in.

    Any suggestions or pin out on cable so i can verify?



  • #2
    Here is a link to the diagram of the cables and parts necessary to connect the Steltronic WINS hardware to a flat screen LED/LCD monitor.
    Jim Osdale
    Steltronic USA


    • #3
      Jim Osdale
      Steltronic USA


      Topic Starter RibbonScript


      Adsense Classic 2


      Related Topics



      Preventative Maintenance - A Jets A2 - Elevator & Pits

      All this work just to clean under the elevator !!??? LOL A friend is replacing a number of his elevators as the left hand triangle plate brackets are breaking. Rather than...

      Preventative Maintenance - A Jets A2 - Ball Wheel Belt Question

      A friend was looking at his ball wheel belt which stated it was 208" long, (Pic 1). He was pretty sure that it is a B205 belt which should be 205" long. The answer...


      my appologies if Ive posted this in the wrong area, this is my second post on this site, Ive got a 10 lane center ( 5 pairs ) and on lanes 3&4, I am having a problem with...

      Pin spot is off

      I'm currently working at a 38 Lane center. Of those 38 lanes only a few are having this issue.

      I'm currently trying to get all the lanes to have perfect pin spots...

      Idler shaft

      One of our lanes has a bad bearing assembly for the distributor pulley. The idler shaft that the pulleys sit on has been damaged where it sits on the bearing. I took the assembly...