Announcement

Collapse
No announcement yet.

Old system

Collapse

Adsense Classic 1

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Old system

    When you move a computer to a different pair how do you make it read that pair. For instance you moved 15&16 to now 9&10. Thanks.

  • #2
    Press Bowl one time during boot up, after the hard drive starts reading, or when prompted to, and enter the odd lane number. Press Enter and your computer is now renumbered.

    Comment


    • #3
      Thank you so much we are just trying to get by with this system. We've got 16 lanes and had 32 lanes worth of stuff and are running out of parts.

      Comment


      • #4
        You running the ms dos system?

        Comment

        Adsense Classic 2

        Collapse

        Related Topics

        Collapse

         

        Preventative Maintenance Brunswick A Jets A2 - Pin Light Conversion

        Rear Wall House was having a big problem with the pin lights. The ends were pretty much worn out from the vibration so duct tape, electrical tape and jiggling the light would...
         

        Detector Rod Adjustment

        I am currently doing my first detector rod adjustment. The first thing the book tells you to do is adjust the gap between the oor controller and the blocking surface on the detector...
         

        The New Brunswick NXT

        Best Pinsetter on the market today
         

        Distributor Repair Kit

        Has anyone installed a dist. repair kit ? Wanted to know if its a fix to the problem or just a brunswick brand Band-Aid....
         

        Preventative Maintenance - Brunswick A, Jets, A2 - Wiring Problems

        Had to do a service call at a friend's center as he was out of town. Seems Accelerator on 5 & 6 had quit. Breaker, (which fed 3 pairs), had not tripped, ohm check on motor...
        Working...
        X