Announcement

Collapse
No announcement yet.

Old system

Collapse

Adsense Classic 1

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Radical TD
    started a topic Old system

    Old system

    When you move a computer to a different pair how do you make it read that pair. For instance you moved 15&16 to now 9&10. Thanks.

  • Fabian
    replied
    You running the ms dos system?

    Leave a comment:


  • Radical TD
    replied
    Thank you so much we are just trying to get by with this system. We've got 16 lanes and had 32 lanes worth of stuff and are running out of parts.

    Leave a comment:


  • xiixtech
    replied
    Press Bowl one time during boot up, after the hard drive starts reading, or when prompted to, and enter the odd lane number. Press Enter and your computer is now renumbered.

    Leave a comment:

Adsense Classic 2

Collapse

Related Topics

Collapse

 

The New Brunswick NXT

Best Pinsetter on the market today
 

Distributor Repair Kit

Has anyone installed a dist. repair kit ? Wanted to know if its a fix to the problem or just a brunswick brand Band-Aid....
 

Preventative Maintenance - Brunswick A, Jets, A2 - Wiring Problems

Had to do a service call at a friend's center as he was out of town. Seems Accelerator on 5 & 6 had quit. Breaker, (which fed 3 pairs), had not tripped, ohm check on motor...
 

Preventative Maintenance - A Jets A2 - Pinsetter Procedures

Over the years I've compiled info in a 3-ring binder for quick reference. I decided to add a bunch to it and make one for a few of my friends including the rear-wall house. ...
 

Transformer Installation Instructions

Does anyone have the installation instructions for P/N: 12-862164-000 ?
Working...
X