Announcement

Collapse
No announcement yet.

Cameras freezing up

Collapse

Adsense Classic 1

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • ryan300idaho
    started a topic Cameras freezing up

    Cameras freezing up

    We have a pair of lanes that the cameras have been freezing up. we would plugg and unplugg the connection at camera and computer, he have swapped cables put on some magnet deals on to help with static electricity. we have tried new camera, does anyone else out there have any tricks that worked for you. Strike 12 have been working on it. I'm sure they are just as frustrated as i am. any help would be appreciated.

  • Fabian
    replied
    How did it go finally with the new cable

    Leave a comment:


  • ryan300idaho
    replied
    moved computer problem didnt fallow....Darryl sent a new cable so fingers crossed Thanks

    Leave a comment:


  • xiixtech
    replied
    Ryan has the new Windows version of scoring. I haven't suggested checking the electrical connections to ensure the are tight inside the outlet box, but that is a great suggestion as it has been a problem in the past as Ted indicated above.

    Leave a comment:


  • JoelJoanis
    replied
    Which version of 12 x do you have?

    Leave a comment:


  • ryan300idaho
    replied
    thanks i will try and look at that to make sure.

    Leave a comment:


  • Ted
    replied
    When this happened in one center, the neutral wire had a lose connection. Check the receptacle for the lane computer and the connection from where it's fed. And make sure the grounds are intact there as well.

    Leave a comment:

Adsense Classic 2

Collapse

Related Topics

Collapse

 

Detector Rod Adjustment

I am currently doing my first detector rod adjustment. The first thing the book tells you to do is adjust the gap between the oor controller and the blocking surface on the detector...
 

The New Brunswick NXT

Best Pinsetter on the market today
 

Distributor Repair Kit

Has anyone installed a dist. repair kit ? Wanted to know if its a fix to the problem or just a brunswick brand Band-Aid....
 

Preventative Maintenance - Brunswick A, Jets, A2 - Wiring Problems

Had to do a service call at a friend's center as he was out of town. Seems Accelerator on 5 & 6 had quit. Breaker, (which fed 3 pairs), had not tripped, ohm check on motor...
 

Preventative Maintenance - A Jets A2 - Pinsetter Procedures

Over the years I've compiled info in a 3-ring binder for quick reference. I decided to add a bunch to it and make one for a few of my friends including the rear-wall house. ...
Working...
X