Announcement

Collapse
No announcement yet.

Nominations Are Open

Collapse

Adsense Classic 1

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Nominations Are Open

    Wepauls - 2011
    Kanga - 2010
    8270 King - 2009
    Masternut - 2008
    Steve Stafford - 2007
    Ted - 2006
    Steve Stafford - 2005
    Masternut - 2004
    Roscoe - 2000
    Kevin Hughes - 1999







    Bowl-Tech Tech Of The Year 2013
    Who Will It Be?
    Click HERE to See Rules for 2013
    Look for the Tech of the Year and Rising Star of the Year nomination graphic below
    each members name in the forums after Midnight January 1
    Mike Wilson
    Bowl-Tech Inc.

Adsense Classic 2

Collapse
 

Preventative Maintenance - Brunswick All - Bearing Life

In relation to the recent “B Shaft” failure, I thought I would throw this subject on the table for discussion. I remember when I attended a “Bearing Life” seminar long...
 

Preventative Maintenance Brunswick A Jets A2 - SC/Dk Pulley Assembly

Found a bad left needle bearing in the Scissor / Deck Cable Assembly at the Rear Wall House. Needle Bearings are falling out and there is a pile of metal under it. Been 30+...
 

Preventative Maintenance - Brunswick B-10's Hollar House

Took a trip back in time to the classic “Hollar House”. The lanes went in in 1908. There was no ABC but according to the current operator, Tom, it became sanctioned when...
 

Table support assembly

My night at part job all 32 lanes going of leagues no where to move. Table support assembly broke rod broke # 2 Cell and bent the heck out of wire channel. Changed the Cell,...
 

Foul Light LED Mod

Here is a mod I came up with for a foul light unit. I was able to remove the old indicator light bulbs and replace them with ultra bright white LEDs. This should work for about...
Working...
X