Announcement

Collapse

No Replies to Posts

Special Instructions - Due to the nature of this forum we don't allow public replies to posts, please use the contact information in the post or send the originator a PM by clicking there their name select the activities tab and then click Private Message button.


Notice! - When making a post to this forum, it will be moderated and will not be visible until an Admin approves the post.

See more
See less

Assistant Manager / Manager Wanted

Collapse

Adsense Classic 1

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Assistant Manager / Manager Wanted

    Erie Lanes in Philadelphia is search for a motivated individual to fill the spot of an assistant manager who has the desire and drive to become a center manager. We are a 48 lane of traditional bowling with a food and beverage operation. I am looking for an individual who takes a hands on approach to the business as this position would require you to work shifts at the center aside from managerial responsibilities. Please Email MrKingpin@aol.com directly for more information or to send your resume. compensation set based on your knowledge and experience.

Adsense Classic 2

Collapse
 

Preventative Maintenance - Brunswick All - Bearing Life

In relation to the recent “B Shaft” failure, I thought I would throw this subject on the table for discussion. I remember when I attended a “Bearing Life” seminar long...
 

Preventative Maintenance Brunswick A Jets A2 - SC/Dk Pulley Assembly

Found a bad left needle bearing in the Scissor / Deck Cable Assembly at the Rear Wall House. Needle Bearings are falling out and there is a pile of metal under it. Been 30+...
 

Preventative Maintenance - Brunswick B-10's Hollar House

Took a trip back in time to the classic “Hollar House”. The lanes went in in 1908. There was no ABC but according to the current operator, Tom, it became sanctioned when...
 

Table support assembly

My night at part job all 32 lanes going of leagues no where to move. Table support assembly broke rod broke # 2 Cell and bent the heck out of wire channel. Changed the Cell,...
 

Foul Light LED Mod

Here is a mod I came up with for a foul light unit. I was able to remove the old indicator light bulbs and replace them with ultra bright white LEDs. This should work for about...
Working...
X