No Replies to Posts

Special Instructions - Due to the nature of this forum we don't allow public replies to posts, please use the contact information in the post or send the originator a PM by clicking there their name select the activities tab and then click Private Message button.

Notice! - When making a post to this forum, it will be moderated and will not be visible until an Admin approves the post.

See more
See less

Head Mechanic & Facility Manager


Adsense Classic 1

  • Filter
  • Time
  • Show
Clear All
new posts

  • Head Mechanic & Facility Manager

    Shore Lanes Bowling Center in St. Clair Shores Michigan is now hiring for an A and B mechanic. Candidates will be someone who has a master level knowledge of A-2 pinsetters both mechanical and electrical.

    A-2 Pinsetters, BES X scoring, Kegel Lane Walker, Full leagues, modern bowling center.

    Able to Keep things running smoothly—ensuring that our pinsetters, scoring, lanes, and other facility equipment operate well.

    Our Facility Managers will assist our GM in the planning and budgeting that’s involved with all center repairs and upgrades.
    Monitors and maintain all parts of the building. In the event that the venue’s equipment does malfunction, it’s up to the Facility Manager to identify the problem suggest repairs to replacements for the equipment and find a way to get it done.

    While they do perform maintenance and repair work, Facility Managers are also responsible for administrative operations such as scheduling mechanics. Our Facility Managers will help our B and C Mechanics in safety procedures and operating standards related to bowling equipment, building maintenance, and other preventative maintenance programs.

    40 hour work week. Some weekends, some nights, some holidays. Compensation up to $60,000 for candidates who can communicate well, are contentious of their work and enjoy fixing problems and have a positive attitude. We are a metro Detroit based center that has stood tall amongst its competitors since 1959 and want to continue working with personnel who enjoy finding solutions to problems and working with a team. Please contact
    Last edited by justinproth; Yesterday, 01:14 PM.

Adsense Classic 2



Haven't actually done any welding for years, so I was up to the challenge when I found this machine that was having problem setting the head pin.
Someone had welded this...

Preventative Maintenance - A Jets A2 - Pinsetter Procedures

Over the years I've compiled info in a 3-ring binder for quick reference. I decided to add a bunch to it and make one for a few of my friends including the rear-wall house. ...

Preventative Maintenance - Brunswick All - Bearing Life

In relation to the recent “B Shaft” failure, I thought I would throw this subject on the table for discussion. I remember when I attended a “Bearing Life” seminar long...

Foul Light LED Mod

Here is a mod I came up with for a foul light unit. I was able to remove the old indicator light bulbs and replace them with ultra bright white LEDs. This should work for about...