No Replies to Posts

Special Instructions - Due to the nature of this forum we don't allow public replies to posts, please use the contact information in the post or send the originator a PM by clicking there their name select the activities tab and then click Private Message button.

Notice! - When making a post to this forum, it will be moderated and will not be visible until an Admin approves the post.

See more
See less

A or B Mechanic Wanted for Brunswick A's


Adsense Classic 1

  • Filter
  • Time
  • Show
Clear All
new posts

  • A or B Mechanic Wanted for Brunswick A's

    Sixteen-lane center in New Smyrna Beach, just south of Daytona Beach, Florida. Owner is a mechanic who needs some help, willing to train. Contact Steve at

Adsense Classic 2



Haven't actually done any welding for years, so I was up to the challenge when I found this machine that was having problem setting the head pin.
Someone had welded this...

Preventative Maintenance - A Jets A2 - Pinsetter Procedures

Over the years I've compiled info in a 3-ring binder for quick reference. I decided to add a bunch to it and make one for a few of my friends including the rear-wall house. ...

Preventative Maintenance - Brunswick All - Bearing Life

In relation to the recent “B Shaft” failure, I thought I would throw this subject on the table for discussion. I remember when I attended a “Bearing Life” seminar long...

Foul Light LED Mod

Here is a mod I came up with for a foul light unit. I was able to remove the old indicator light bulbs and replace them with ultra bright white LEDs. This should work for about...