Announcement

Collapse

No Replies to Posts

Special Instructions - Due to the nature of this forum we don't allow public replies to posts, please use the contact information in the post or send the originator a PM by clicking there their name select the activities tab and then click Private Message button.


Notice! - When making a post to this forum, it will be moderated and will not be visible until an Admin approves the post.

See more
See less

NEW HAVEN, CT AREA - Now Hiring Mechanics @ Bowlero Corp!

Collapse

Adsense Classic 1

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • NEW HAVEN, CT AREA - Now Hiring Mechanics @ Bowlero Corp!

    Bowlero Corp is NOW HIRING B-Mechanics & C-Mechanics at multiple locations in the Connecticut area! Openings are available at:
    • Brunswick Zone Colony Lanes - Wallingford, CT
    • AMF Circle Lanes - East Haven, CT
    • Bowlmor - Norwalk, CT
    • Bowlero - Milford, CT

    B-Mechanic/Experienced Mechanic:

    State-of-the-art equipment requires top-of-the-line talent, which is why we’re looking for experienced mechanics (or “B-Mechanics”) to keep our venues in superb working order. The entertainment experience here goes way beyond your typical bowling alley, requiring mechanics who are technically proficient and can remedy issues in a discrete, professional manner. Our experienced mechanics monitor/maintain the venue’s HVAC, plumbing, and electrical systems on a daily basis, performing urgent repairs and preventative maintenance, and adhering to all Bowlmor and OSHA-mandated safety procedures while they do so. These experienced mechanics also act as mentors to our newer mechanics, training them to troubleshoot pin jams, ball return calls, and other malfunctions—all while our guests are bowling.


    C-Mechanic/Entry-Level Mechanic:

    State-of-the-art equipment requires top-of-the-line talent, which is why we’re looking for promising entry-level mechanics (or “C-Mechanics”) to help keep our venues in superb working order. Technically minded and open to direction, our C-Mechanics assist our more experienced B-mechanics in maintaining the integrity of our pinspotters/setters, our lane and scoring equipment, and our other venue equipment by performing urgent repairs and routine maintenance. C-Mechanics take part in our rigorous and rewarding training program and are responsible for resolving pin jams, ball return calls, and other malfunctions—all while our guests are bowling. Our goal is the same as yours: to turn you into a skilled mechanic who can keep the party going (especially when something breaks).


    Apply online NOW at https://www.bowlerocorp.com/careers/hourly-positions/
    Or send your resume to Ashley at asgrizzi@bowlerocorp.com

Adsense Classic 2

Collapse
 

Before and After

Actuator modified to eliminate hanging Bananas. Clean and paint associated parts.

...
 

Distributor Repair Kit

Has anyone installed a dist. repair kit ? Wanted to know if its a fix to the problem or just a brunswick brand Band-Aid....
 

Preventative Maintenance - Brunswick A, Jets, A2 - Wiring Problems

Had to do a service call at a friend's center as he was out of town. Seems Accelerator on 5 & 6 had quit. Breaker, (which fed 3 pairs), had not tripped, ohm check on motor...
 

Pins getting gouged

Has anyone ever had this problem of the pins getting gouged?
I have one lane pair that is just chewing the pins up. There is nothing visibly sticking out on either lane...
 

Preventative Maintenance - A Jets A2 - Pinsetter Procedures

Over the years I've compiled info in a 3-ring binder for quick reference. I decided to add a bunch to it and make one for a few of my friends including the rear-wall house. ...
Working...
X