Announcement

Collapse

No Replies to Posts

Special Instructions - Due to the nature of this forum we don't allow public replies to posts, please use the contact information in the post or send the originator a PM by clicking there their name select the activities tab and then click Private Message button.


Notice! - When making a post to this forum, it will be moderated and will not be visible until an Admin approves the post.

See more
See less

40 Lane Traditional Center installing GSX machines need a Mechanic.

Collapse

Adsense Classic 1

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • 40 Lane Traditional Center installing GSX machines need a Mechanic.

    I work for a 40 lane center in Louisville, KY and we are taking out our 82-70's and Quibica Conqueror 1.76 at the end of August and installing Brunswick GSX machines and Vector Plus. Because of this I am looking for a few head mechanic. Would be a full time salary position with pay based on experience. We are part of a 14 center chain based out of Hendersonville, TN and the center is a very busy traditional center. Contact me to apply johnmccarthy@strikeandspare.net or 502-896-1727

Adsense Classic 2

Collapse

Related Topics

Collapse

 

Detector Rod Adjustment

I am currently doing my first detector rod adjustment. The first thing the book tells you to do is adjust the gap between the oor controller and the blocking surface on the detector...
 

The New Brunswick NXT

Best Pinsetter on the market today
 

Distributor Repair Kit

Has anyone installed a dist. repair kit ? Wanted to know if its a fix to the problem or just a brunswick brand Band-Aid....
 

Preventative Maintenance - Brunswick A, Jets, A2 - Wiring Problems

Had to do a service call at a friend's center as he was out of town. Seems Accelerator on 5 & 6 had quit. Breaker, (which fed 3 pairs), had not tripped, ohm check on motor...
 

Preventative Maintenance - A Jets A2 - Pinsetter Procedures

Over the years I've compiled info in a 3-ring binder for quick reference. I decided to add a bunch to it and make one for a few of my friends including the rear-wall house. ...
Working...
X