No Replies to Posts

Special Instructions - Due to the nature of this forum we don't allow public replies to posts, please use the contact information in the post or send the originator a PM by clicking there their name select the activities tab and then click Private Message button.

Notice! - When making a post to this forum, it will be moderated and will not be visible until an Admin approves the post.

See more
See less

Brunswick A2 Mechanic-East Texas


Adsense Classic 1

  • Filter
  • Time
  • Show
Clear All
new posts

  • Brunswick A2 Mechanic-East Texas

    We are a looking for a full-time and a part-time mechanic for a 16 lane Family Entertainment Center located in Sulphur Springs, Texas with A2 pinsetters. We have QubicaAMF scoring that was put in in November of 2014. We are using a custodian Ion lane machine . The requirements for the candidate: You would need to be able to work nights, weekends, and holidays. The main responsibilities would be to immediately correct pinsetter malfunctions while bowling is in progress along with any scoring issues. Candidate must also do routine and preventative maintenance as well as complete any other tasks as assigned. If you have any questions, please email me at or feel free to send resume and salary requirements.

    Classic Lanes
    333 Industrial Drive, E.
    Sulphur Springs, Tx. 75482

Adsense Classic 2


Related Topics



Preventative Maintenance Brunswick A Jets A2 - Pin Light Conversion

Rear Wall House was having a big problem with the pin lights. The ends were pretty much worn out from the vibration so duct tape, electrical tape and jiggling the light would...

Detector Rod Adjustment

I am currently doing my first detector rod adjustment. The first thing the book tells you to do is adjust the gap between the oor controller and the blocking surface on the detector...

The New Brunswick NXT

Best Pinsetter on the market today

Distributor Repair Kit

Has anyone installed a dist. repair kit ? Wanted to know if its a fix to the problem or just a brunswick brand Band-Aid....

Preventative Maintenance - Brunswick A, Jets, A2 - Wiring Problems

Had to do a service call at a friend's center as he was out of town. Seems Accelerator on 5 & 6 had quit. Breaker, (which fed 3 pairs), had not tripped, ohm check on motor...