No Replies to Posts

Special Instructions - Due to the nature of this forum we don't allow public replies to posts, please use the contact information in the post or send the originator a PM by clicking there their name select the activities tab and then click Private Message button.

Notice! - When making a post to this forum, it will be moderated and will not be visible until an Admin approves the post.

See more
See less

Pin Chasers Wanted in Goleta, California


Adsense Classic 1

  • Filter
  • Time
  • Show
Clear All
new posts

  • Pin Chasers Wanted in Goleta, California

    Are you mechanically inclined or have past mechanic experience either in bowling or another industry? Looking for a new challenge?

    Zodo's - Bowling & Beyond ( located on the California central coast near the UCSB campus is looking for 2 part time pin chasers in Goleta, California. We are a popular, recently remodeled bowling and family entertainment center featuring 24 lanes outfitted with AMF 82-90XL pinspotters and Qubica BES-X automatic scoring, a full sports bar and restaurant, and arcade. We are seeking individuals willing to work night and weekend shifts in addition to shifts during the regular work week. These positions have the potential to evolve into full time.

    Pin Chasers at Zodos...
    • Fix trouble calls on our AMF 82-90XL pinspotters and related equipment
    • Assist with Pinsetter Repairs, Scheduled and Preventative Maintenance
    • Oil and Clean bowling lanes with our Kegel IKON lane machine
    Notes and Requirements
    • Safety is a Must
    • Ability to Read Technical Manuals
    • General Mechanical/Maintenance Aptitude
    • Experience in use of hand tools and power tools
    • Must be pleasant, have a good attitude towards people and co-workers
    • Willing to Learn
    If you are new to the bowling industry, we will train you!

    Please inquire with John Embry, Lead Mechanic at (805) 967-0128 or Steve Davis, General Manager at (805) 967-0128 x113.

Adsense Classic 2


Related Topics



Preventative Maintenance Brunswick A Jets A2 - Pin Light Conversion

Rear Wall House was having a big problem with the pin lights. The ends were pretty much worn out from the vibration so duct tape, electrical tape and jiggling the light would...

Detector Rod Adjustment

I am currently doing my first detector rod adjustment. The first thing the book tells you to do is adjust the gap between the oor controller and the blocking surface on the detector...

The New Brunswick NXT

Best Pinsetter on the market today

Distributor Repair Kit

Has anyone installed a dist. repair kit ? Wanted to know if its a fix to the problem or just a brunswick brand Band-Aid....

Preventative Maintenance - Brunswick A, Jets, A2 - Wiring Problems

Had to do a service call at a friend's center as he was out of town. Seems Accelerator on 5 & 6 had quit. Breaker, (which fed 3 pairs), had not tripped, ohm check on motor...