Announcement

Collapse

No Replies to Posts

Special Instructions - Due to the nature of this forum we don't allow public replies to posts, please use the contact information in the post or send the originator a PM by clicking there their name select the activities tab and then click Private Message button.


Notice! - When making a post to this forum, it will be moderated and will not be visible until an Admin approves the post.

See more
See less

Splitsvile- Tampa Looking for part time mechanic

Collapse

Adsense Classic 1

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Splitsvile- Tampa Looking for part time mechanic

    Splitsville-Tampa is in need of a part time A2 mechanic some GSX knowledge would be preferred but not required. Hours will be weekends and pay will depend on experience.
    Contact will be Marty, please email all resumes or questions to martyc@splitsvillelanes.com

Adsense Classic 2

Collapse

Related Topics

Collapse

 

Preventative Maintenance Brunswick A Jets A2 - Pin Light Conversion

Rear Wall House was having a big problem with the pin lights. The ends were pretty much worn out from the vibration so duct tape, electrical tape and jiggling the light would...
 

Detector Rod Adjustment

I am currently doing my first detector rod adjustment. The first thing the book tells you to do is adjust the gap between the oor controller and the blocking surface on the detector...
 

The New Brunswick NXT

Best Pinsetter on the market today
 

Distributor Repair Kit

Has anyone installed a dist. repair kit ? Wanted to know if its a fix to the problem or just a brunswick brand Band-Aid....
 

Preventative Maintenance - Brunswick A, Jets, A2 - Wiring Problems

Had to do a service call at a friend's center as he was out of town. Seems Accelerator on 5 & 6 had quit. Breaker, (which fed 3 pairs), had not tripped, ohm check on motor...
Working...
X