No announcement yet.

Help with Managing Subscriptions


Adsense Classic 1

  • Filter
  • Time
  • Show
Clear All
new posts

  • Help with Managing Subscriptions

    Managing subscriptions can be a very powerful tool and can allow you to get the most out of your Bowl-Tech experience.

    This tutorial shows you how to manage your subscriptions and set your email notifications for those subscriptions.

    Please shoot us a note if you have any questions.

    As with all of your settings you start by clicking your login name in the upper corner and the select My Profile

    This is your user profile, there several tabs here, click the subscribed tab and then click edit subscriptions to actually remove and manage your subscriptions.

    Under your picture you can see your total number of subscriptions and see who is subscribed to you. You will see the list of subscriptions and can click buttons on them to unsubscribe.

    Next, you need to set up your email notifications. Click the Notifications tab. You can set yourself up to auto subscribe every time you post in a thread. Or you can just set up to keep your notifications Private Message only.
    The email options are off by default, so if you plan to use them go in and turn them on.

    Thanks for taking the time to check this out.


    Mike Wilson
    Bowl-Tech Inc.

Adsense Classic 2


Preventative Maintenance - Brunswick All - Bearing Life

In relation to the recent “B Shaft” failure, I thought I would throw this subject on the table for discussion. I remember when I attended a “Bearing Life” seminar long...

Preventative Maintenance Brunswick A Jets A2 - SC/Dk Pulley Assembly

Found a bad left needle bearing in the Scissor / Deck Cable Assembly at the Rear Wall House. Needle Bearings are falling out and there is a pile of metal under it. Been 30+...

Preventative Maintenance - Brunswick B-10's Hollar House

Took a trip back in time to the classic “Hollar House”. The lanes went in in 1908. There was no ABC but according to the current operator, Tom, it became sanctioned when...

Table support assembly

My night at part job all 32 lanes going of leagues no where to move. Table support assembly broke rod broke # 2 Cell and bent the heck out of wire channel. Changed the Cell,...

Foul Light LED Mod

Here is a mod I came up with for a foul light unit. I was able to remove the old indicator light bulbs and replace them with ultra bright white LEDs. This should work for about...