No announcement yet.

Subscribing to a Thread


Adsense Classic 1

  • Filter
  • Time
  • Show
Clear All
new posts

  • Subscribing to a Thread

    To subscribe to a thread all you need to do is click the subscribe button at the top of the thread. If you have not already done so you will need to set up how your subscriptions will notify you. These are turned off by default so if you have not set up notifications yet then please follow instructions in the second picture.

    There is also an additional help file for managing your subscriptions that can be found here.
    Click image for larger version  Name:	subscribe-top-thread.png Views:	1 Size:	177.5 KB ID:	1067680

    This is where you set up your notifications.
    Click image for larger version  Name:	subscribe-settings.png Views:	1 Size:	475.0 KB ID:	1067681
    Mike Wilson
    Bowl-Tech Inc.

Adsense Classic 2


The New Brunswick NXT

Best Pinsetter on the market today

Distributor Repair Kit

Has anyone installed a dist. repair kit ? Wanted to know if its a fix to the problem or just a brunswick brand Band-Aid....

Preventative Maintenance - Brunswick A, Jets, A2 - Wiring Problems

Had to do a service call at a friend's center as he was out of town. Seems Accelerator on 5 & 6 had quit. Breaker, (which fed 3 pairs), had not tripped, ohm check on motor...

Preventative Maintenance - A Jets A2 - Pinsetter Procedures

Over the years I've compiled info in a 3-ring binder for quick reference. I decided to add a bunch to it and make one for a few of my friends including the rear-wall house. ...

Transformer Installation Instructions

Does anyone have the installation instructions for P/N: 12-862164-000 ?