Announcement

Collapse
No announcement yet.

How To Post A New Topic

Collapse

Adsense Classic 1

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • How To Post A New Topic

    Prior to posting a new topic, do a search through the database on your topic, after 20 years the chances are pretty good that we discussed it in the past.

    For search assistance click the Search Help link on the navigation bar above.

    If you decide to post be sure to pick the forum topic that best fits your question.

    Click image for larger version

Name:	newpost1.5.png
Views:	1
Size:	52.1 KB
ID:	1068356


    Scroll the list of forum topics and pick one appropriate for your post.

    Click image for larger version

Name:	newpost2.0.png
Views:	1
Size:	73.5 KB
ID:	1068357


    Click the New Topic Button

    Click image for larger version

Name:	newpost2.5.png
Views:	1
Size:	84.6 KB
ID:	1068358


    Fill in the Topic Title and your message.

    Click image for larger version

Name:	newpost3.0.png
Views:	1
Size:	174.4 KB
ID:	1068359

    As with any help topic, if you are unsure, just ask us by clicking the Contact Us link at the bottom of every page.





    Mike Wilson
    Bowl-Tech Inc.

Adsense Classic 2

Collapse
 

Preventative Maintenance - Brunswick All - Bearing Life

In relation to the recent “B Shaft” failure, I thought I would throw this subject on the table for discussion. I remember when I attended a “Bearing Life” seminar long...
 

Preventative Maintenance Brunswick A Jets A2 - SC/Dk Pulley Assembly

Found a bad left needle bearing in the Scissor / Deck Cable Assembly at the Rear Wall House. Needle Bearings are falling out and there is a pile of metal under it. Been 30+...
 

Preventative Maintenance - Brunswick B-10's Hollar House

Took a trip back in time to the classic “Hollar House”. The lanes went in in 1908. There was no ABC but according to the current operator, Tom, it became sanctioned when...
 

Table support assembly

My night at part job all 32 lanes going of leagues no where to move. Table support assembly broke rod broke # 2 Cell and bent the heck out of wire channel. Changed the Cell,...
 

Foul Light LED Mod

Here is a mod I came up with for a foul light unit. I was able to remove the old indicator light bulbs and replace them with ultra bright white LEDs. This should work for about...
Working...
X