Announcement

Collapse

No Replies to Posts

Special Instructions - Due to the nature of this forum we don't allow public replies to posts, please use the contact information in the post or send the originator a PM by clicking there their name select the activities tab and then click Private Message button.

See more
See less

82/70 STUFF NEEDED FOR SPARES

Collapse

Adsense Classic 1

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • 82/70 STUFF NEEDED FOR SPARES

    Hello- I could use the following

    - good solid working odd back end motor w/ gearbox. i would prefer westinghouse.

    - I have old gold 5 board chassis w/ single board Omega Tek's. I could use a couple spares. I prefer updated relays and board included.

    - National combo motor w/ gearbox again in good working order.

    - Westinghouse combo gearbox w/ standard gears in good working order

    Let me know what you have and how much you need for these

    thanks

    woodburnbob2@yahoo.com

Adsense Classic 2

Collapse
 

Distributor Repair Kit

Has anyone installed a dist. repair kit ? Wanted to know if its a fix to the problem or just a brunswick brand Band-Aid....
 

Preventative Maintenance - Brunswick A, Jets, A2 - Wiring Problems

Had to do a service call at a friend's center as he was out of town. Seems Accelerator on 5 & 6 had quit. Breaker, (which fed 3 pairs), had not tripped, ohm check on motor...
 

Pins getting gouged

Has anyone ever had this problem of the pins getting gouged?
I have one lane pair that is just chewing the pins up. There is nothing visibly sticking out on either lane...
 

Preventative Maintenance - A Jets A2 - Pinsetter Procedures

Over the years I've compiled info in a 3-ring binder for quick reference. I decided to add a bunch to it and make one for a few of my friends including the rear-wall house. ...
 

Transformer Installation Instructions

Does anyone have the installation instructions for P/N: 12-862164-000 ?
Working...
X