Announcement

Collapse

No Replies to Posts

Special Instructions - Due to the nature of this forum we don't allow public replies to posts, please use the contact information in the post or send the originator a PM by clicking there their name select the activities tab and then click Private Message button.

See more
See less

Have a project 6525 and need omega tek boards

Collapse

Adsense Classic 1

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Have a project 6525 and need omega tek boards

    I work on omega tek 6525 30s for a living, figure the best way to familiarize myself with chassis repair is to get a banged up one working. Got one that's been dropped pretty bad after having the omega tek boards removed, Pretty set on replacing the PRs that are damaged but could use help on finding a replacement set of the boards to get it actually functional. I only have the board all the way on the bottom that the stepper wires go to.

Adsense Classic 2

Collapse
 

Distributor Repair Kit

Has anyone installed a dist. repair kit ? Wanted to know if its a fix to the problem or just a brunswick brand Band-Aid....
 

Preventative Maintenance - Brunswick A, Jets, A2 - Wiring Problems

Had to do a service call at a friend's center as he was out of town. Seems Accelerator on 5 & 6 had quit. Breaker, (which fed 3 pairs), had not tripped, ohm check on motor...
 

Pins getting gouged

Has anyone ever had this problem of the pins getting gouged?
I have one lane pair that is just chewing the pins up. There is nothing visibly sticking out on either lane...
 

Preventative Maintenance - A Jets A2 - Pinsetter Procedures

Over the years I've compiled info in a 3-ring binder for quick reference. I decided to add a bunch to it and make one for a few of my friends including the rear-wall house. ...
 

Transformer Installation Instructions

Does anyone have the installation instructions for P/N: 12-862164-000 ?
Working...
X