Announcement

Collapse
No announcement yet.

Bowl-Tech Site Software Upgrade

Collapse

Adsense Classic 1

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Bowl-Tech Site Software Upgrade

    Our site software will be upgraded on Tuesday the 25th at approximately 16:15 PST

    There may be a short site outage and or some broken display styles during the process but it should not last more than a few minutes.

    Thanks for your patiences

    Sincerely

    Mike Wilson
    Mike Wilson
    Bowl-Tech Inc.

Adsense Classic 2

Collapse
widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
 

Preventative Maintenance Brunswick A Jets A2 - Pin Light Conversion

Rear Wall House was having a big problem with the pin lights. The ends were pretty much worn out from the vibration so duct tape, electrical tape and jiggling the light would...
 

Detector Rod Adjustment

I am currently doing my first detector rod adjustment. The first thing the book tells you to do is adjust the gap between the oor controller and the blocking surface on the detector...
 

The New Brunswick NXT

Best Pinsetter on the market today
 

Distributor Repair Kit

Has anyone installed a dist. repair kit ? Wanted to know if its a fix to the problem or just a brunswick brand Band-Aid....
 

Preventative Maintenance - Brunswick A, Jets, A2 - Wiring Problems

Had to do a service call at a friend's center as he was out of town. Seems Accelerator on 5 & 6 had quit. Breaker, (which fed 3 pairs), had not tripped, ohm check on motor...
Working...
X