Submit Industry News Story - Bowl-Tech

If you are seeing this you are not logged in to Bowl-Tech. Remove this notice by Registering or Logging in

By your continued use of this site you are agreeing to the following.
You are over the age of 18, have had supervised training in safety and operations for the equipment you work on. Bowl-Tech does not warrant or guarantee the accuracy of information found on this site. Bowl-Tech, its officers and site Admins, Mentors and Guides will not be responsible in the case of losses financial or otherwise as a result of use of ANY information on this site. Posts on this site are allowed by registered members and each registered member is responsible for the content of their posts.

If you can not agree to any of these terms of use above or are not at least 18 years of age you are asked NOT to visit Bowl-Tech or utilize its content. To visit the Bowl-Tech Terms of Service and Rules CLICK HERE

Preventative Maintenance Brunswick A Jets A2 - Pin Light Conversion

Rear Wall House was having a big problem with the pin lights. The ends were pretty much worn out from the vibration so duct tape, electrical tape and jiggling the light would...

Detector Rod Adjustment

I am currently doing my first detector rod adjustment. The first thing the book tells you to do is adjust the gap between the oor controller and the blocking surface on the detector...

The New Brunswick NXT

Best Pinsetter on the market today

Distributor Repair Kit

Has anyone installed a dist. repair kit ? Wanted to know if its a fix to the problem or just a brunswick brand Band-Aid....

Preventative Maintenance - Brunswick A, Jets, A2 - Wiring Problems

Had to do a service call at a friend's center as he was out of town. Seems Accelerator on 5 & 6 had quit. Breaker, (which fed 3 pairs), had not tripped, ohm check on motor...

Working...

X