Announcement

Collapse
No announcement yet.

A22 Viper Board ?

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Falcoshane
    replied
    Got it fixed. It was a lithum battery as Stripperbolt suggested. Ours took #2032 and has run fine since replacing.

    Leave a comment:


  • Falcoshane
    replied
    Hmm, Ok I'll check that out tomorrow. We got a refurbished A22 about 2-3 years ago and of course this is just something no one tells you about. Hopefully it's that easy.

    Leave a comment:


  • Stripperbolt
    replied
    Depends on which generation of GUI you have. The newer GUI was slightly more complicated to access the Viper board than the original one that the A-22 had when we first got the machine in 2005. There are a couple of cables that have to be removed and I think a small PC board that is removed to access the Viper board. Nothing very difficult.

    Leave a comment:


  • Falcoshane
    replied
    Ok, Good to know. We are also getting random messages and its having to download patterns occasionally. Hoping that's not a sign of the GUI going bad.

    I'm guessing that's a fairly easy to replace. Do you remember what you did to do that @Stripperbolt?

    Does that involve just taking the cover of the GUI off? I can't find anything other than the schematic in the manual about it.

    Leave a comment:


  • Stripperbolt
    replied

    As I recall, the battery is one of those lithium watch batteries that can be bought at most any store. Don't remember the number of the battery, though. I used to replace it every year.

    Leave a comment:


  • Pom
    replied
    The Viper PCB is the main board in the GUI. Haven't pulled one out, so not sure on the battery involved. The Viper board is an item you can send to ERC for repair if you needed to.

    Leave a comment:


  • Falcoshane
    started a topic A22 Viper Board ?

    A22 Viper Board ?

    Got a nice message today telling me the battery on the Viper Board is practically dead so it won't keep the date or time until I replace it.

    Only problem is I have no idea what the Viper Board is, let alone finding the battery on it. Looked through the manual, but didn't see it mentioned when
    the date and time was addressed on how to set it.

    Any ideas on where this is and how difficult it'll be to replace?

Topic Starter RibbonScript

Collapse

Adsense Classic 2

Collapse

Related Topics

Collapse

 

Preventative Maintenance - A Jets A2 - Elevator & Pits

All this work just to clean under the elevator !!??? LOL A friend is replacing a number of his elevators as the left hand triangle plate brackets are breaking. Rather than...
 

Preventative Maintenance - A Jets A2 - Ball Wheel Belt Question

A friend was looking at his ball wheel belt which stated it was 208" long, (Pic 1). He was pretty sure that it is a B205 belt which should be 205" long. The answer...
 

MONITOR COLOR ISSUE!!

my appologies if Ive posted this in the wrong area, this is my second post on this site, Ive got a 10 lane center ( 5 pairs ) and on lanes 3&4, I am having a problem with...
 

Pin spot is off

I'm currently working at a 38 Lane center. Of those 38 lanes only a few are having this issue.

I'm currently trying to get all the lanes to have perfect pin spots...
 

Idler shaft

One of our lanes has a bad bearing assembly for the distributor pulley. The idler shaft that the pulleys sit on has been damaged where it sits on the bearing. I took the assembly...
Working...
X