Announcement

Collapse
No announcement yet.

PBW2 one lane won't go down

Collapse

Adsense Classic 1

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    You wont be able to get that motor from the manufacturer because I believe it was modified specifically for Brunswick. I did the Googling years ago and came to that conclusion.

    Open up the gearbox and make sure the roll pin isn't sheared and the retainer for it hasn't broken as a result.
    Factory & Converted A-2 (US, Ger, Jap)
    Comscore ECT, Matrix & DuoHD
    Walker B, Sanction Standard, Original K, Flex Walker & Ikon
    Kegel C.A.T.S

    Comment


    • #17
      Originally posted by Kanga (James) View Post
      You wont be able to get that motor from the manufacturer because I believe it was modified specifically for Brunswick. I did the Googling years ago and came to that conclusion.
      Or perhaps not; I found a site (motors-biz) that has what looks to be that exact Siemens 1/6hp 115/120v gearmotor. Good news: they'll sell them to you for US$30/ea. Bad news: minimum order of 100.

      Originally posted by Kanga (James) View Post
      Open up the gearbox and make sure the roll pin isn't sheared and the retainer for it hasn't broken as a result.
      Done. Roll pin is intact. Even went so far as to remove the gearing altogether. Power to white and black; motor spins like the dickens. Power to red and black; motor hums, does nothing. We've got some other leftovers I'll check when I get the chance.

      Comment

      Adsense Classic 2

      Collapse
       

      Preventative Maintenance - Brunswick A, Jets, A2 - Wiring Problems

      Had to do a service call at a friend's center as he was out of town. Seems Accelerator on 5 & 6 had quit. Breaker, (which fed 3 pairs), had not tripped, ohm check on motor...
       

      Pins getting gouged

      Has anyone ever had this problem of the pins getting gouged?
      I have one lane pair that is just chewing the pins up. There is nothing visibly sticking out on either lane...
       

      Preventative Maintenance - A Jets A2 - Pinsetter Procedures

      Over the years I've compiled info in a 3-ring binder for quick reference. I decided to add a bunch to it and make one for a few of my friends including the rear-wall house. ...
       

      Need Pinout for J2 & J22 (Masking unit)

      Hi Guys!
      I need some help. We're installing custom Masking units at a new location in PDX. Our sister center in Beaverton, OR has ZOT/ Horizon Ball indicator PCB's for the...
       

      Cracked Moving Deck

      I have a couple of pinsetters that have a cracked moving deck and I would like to replace them before leagues start. I have some spares that I can put in but I don't know how...
      Working...
      X