No announcement yet.

Where Do I find Bumper Rails used or cheap..


Adsense Classic 1

  • Filter
  • Time
  • Show
Clear All
new posts

  • Where Do I find Bumper Rails used or cheap..

    Hi I have a couple of lanes that are short a few feet of bumper rails, and its making it hard to have the bumpers come up and down. The bumpers are air driven. I'm looking to see if I can get my hands on something cheaper then new! Where do I go??

  • #2
    You could ask these guys or another used parts dealer. You'll need to know what bumpers you have as well as which parts you need. Can you post a picture?


    • #3
      Watch for centers closing...seems like there are plenty of those these days..picked up 8 lanes of Brunswick last summer for $50 per lane. I bid a bit high, but I really needed to replace a few, and it was still much cheaper than buying new.


      Adsense Classic 2



      Haven't actually done any welding for years, so I was up to the challenge when I found this machine that was having problem setting the head pin.
      Someone had welded this...

      Preventative Maintenance - A Jets A2 - Pinsetter Procedures

      Over the years I've compiled info in a 3-ring binder for quick reference. I decided to add a bunch to it and make one for a few of my friends including the rear-wall house. ...

      Preventative Maintenance - Brunswick All - Bearing Life

      In relation to the recent “B Shaft” failure, I thought I would throw this subject on the table for discussion. I remember when I attended a “Bearing Life” seminar long...

      Foul Light LED Mod

      Here is a mod I came up with for a foul light unit. I was able to remove the old indicator light bulbs and replace them with ultra bright white LEDs. This should work for about...