No announcement yet.

22 ips speed issue on my Phoenix-C


Adsense Classic 1

  • Filter
  • Time
  • Show
Clear All
new posts

  • 22 ips speed issue on my Phoenix-C

    Just picked up a very nice used red box Phoenix-C. But have a speed issue with this thing. I can get all the speeds adjusted correctly except #4 which is the 22 ips. I replaced the speed control board with a brand new one. Same thing. Also replaced the speed pot board. Same thing. The adjustment doesn’t even move when I turn the pot. Just stays around 10. What else controls the speeds on this machine?

  • #2
    sounds to me like a bad relay in the output card.


    Adsense Classic 2


    Related Topics



    Detector Rod Adjustment

    I am currently doing my first detector rod adjustment. The first thing the book tells you to do is adjust the gap between the oor controller and the blocking surface on the detector...

    The New Brunswick NXT

    Best Pinsetter on the market today

    Distributor Repair Kit

    Has anyone installed a dist. repair kit ? Wanted to know if its a fix to the problem or just a brunswick brand Band-Aid....

    Preventative Maintenance - Brunswick A, Jets, A2 - Wiring Problems

    Had to do a service call at a friend's center as he was out of town. Seems Accelerator on 5 & 6 had quit. Breaker, (which fed 3 pairs), had not tripped, ohm check on motor...

    Preventative Maintenance - A Jets A2 - Pinsetter Procedures

    Over the years I've compiled info in a 3-ring binder for quick reference. I decided to add a bunch to it and make one for a few of my friends including the rear-wall house. ...