Announcement

Collapse
No announcement yet.

lane oil

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • lane oil

    Whats up guys,I have a question for y'all and any inout would be great... I have Murray lanes and im looking to change the conditioner I currently using (Kegel ICE).. I have been told that the finish on these lanes are not great.. so I would like to go to something that would work with what I have now

  • #2
    Current from Kegel is universal for any type of lane.

    Comment


    • #3
      I have a couple years experience with Murrey lanes that were installed new in a high league linage 32 lane center. I experimented with several oils came to the conclusion that Murrey lanes play best with a "hooky" oil. Offense HV worked best for me. Prodigy could also be a good choice.

      Comment


      • #4
        Thanks guys.. I think im gonna go with offense HV

        Comment

        Topic Starter RibbonScript

        Collapse

        Adsense Classic 2

        Collapse

        Related Topics

        Collapse

         

        Preventative Maintenance - A Jets A2 - Elevator & Pits

        All this work just to clean under the elevator !!??? LOL A friend is replacing a number of his elevators as the left hand triangle plate brackets are breaking. Rather than...
         

        Preventative Maintenance - A Jets A2 - Ball Wheel Belt Question

        A friend was looking at his ball wheel belt which stated it was 208" long, (Pic 1). He was pretty sure that it is a B205 belt which should be 205" long. The answer...
         

        MONITOR COLOR ISSUE!!

        my appologies if Ive posted this in the wrong area, this is my second post on this site, Ive got a 10 lane center ( 5 pairs ) and on lanes 3&4, I am having a problem with...
         

        Pin spot is off

        I'm currently working at a 38 Lane center. Of those 38 lanes only a few are having this issue.

        I'm currently trying to get all the lanes to have perfect pin spots...
         

        Idler shaft

        One of our lanes has a bad bearing assembly for the distributor pulley. The idler shaft that the pulleys sit on has been damaged where it sits on the bearing. I took the assembly...
        Working...
        X