Announcement

Collapse
No announcement yet.

Phoenix S and pad - 3/8 cleaner line inlet coversion

Collapse

Adsense Classic 1

Collapse
This is a sticky topic.
X
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Phoenix S and pad - 3/8 cleaner line inlet coversion


  • #2
    You should give credit, where credit is due...
    Conditioner: Pantene Pro-V Brunette Expressions with Color Enhancer
    Cleaner: Fabuloso Spring Fresh with Bleach Alternative
    Cloth: ShamWow!
    Machine: Johnny 5
    Surface: Melamine-impregnated, phenolic-treated, high pressure pressed craft paper

    Comment


    • #3
      Come on Shame does he ever !
      Television is called a medium because it is neither rare or well done.

      Comment


      • #4
        This was Alex' idea.....I assume.....Jason (EX-MECH) is the one who suggested I do it if I remember correctly.

        I just put up the pic so people could get a visual of it.

        Comment


        • #5
          The credit goes to Jason Karnuth.

          I just think when something like that is posted the credit should go to the appropriate party. Jason has some of the best ideas I've seen in this industry and he's never received the credit he deserves.

          That's all I'm saying
          Conditioner: Pantene Pro-V Brunette Expressions with Color Enhancer
          Cleaner: Fabuloso Spring Fresh with Bleach Alternative
          Cloth: ShamWow!
          Machine: Johnny 5
          Surface: Melamine-impregnated, phenolic-treated, high pressure pressed craft paper

          Comment


          • #6
            Nothing personal but the pic took a shic. =;->=

            Comment

            Adsense Classic 2

            Collapse
             

            Preventative Maintenance - Brunswick All - Bearing Life

            In relation to the recent “B Shaft” failure, I thought I would throw this subject on the table for discussion. I remember when I attended a “Bearing Life” seminar long...
             

            Preventative Maintenance Brunswick A Jets A2 - SC/Dk Pulley Assembly

            Found a bad left needle bearing in the Scissor / Deck Cable Assembly at the Rear Wall House. Needle Bearings are falling out and there is a pile of metal under it. Been 30+...
             

            Preventative Maintenance - Brunswick B-10's Hollar House

            Took a trip back in time to the classic “Hollar House”. The lanes went in in 1908. There was no ABC but according to the current operator, Tom, it became sanctioned when...
             

            Table support assembly

            My night at part job all 32 lanes going of leagues no where to move. Table support assembly broke rod broke # 2 Cell and bent the heck out of wire channel. Changed the Cell,...
             

            Foul Light LED Mod

            Here is a mod I came up with for a foul light unit. I was able to remove the old indicator light bulbs and replace them with ultra bright white LEDs. This should work for about...
            Working...
            X