Announcement

Collapse
No announcement yet.

Looking to replace Fire and Ice combo on old ProAnvilane

Collapse

Adsense Classic 1

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Looking to replace Fire and Ice combo on old ProAnvilane

    We got a Flex machine last year and still trying to find a playable shot for all players. The guys with allot of speed are scoring well but the slower ball speed guys are struggling. Balls are hooking up early and roll out before the pocket.Thinking of going to a lower viscosity oil with more surface tension. Thanks allot,Sid

  • #2
    Had the same issue with fire and curve.. We switched to Black Gold by neo-tak... but we have Anvilane... Maybe Neo-1 for Proanvil
    Chris Doughten
    Lodge Lanes, Belleville Mi

    Comment


    • #3
      We switch to Fire and Prodigy . Seems to me much more consistent than Ice. Are you using Black Gold forward and reverse?

      Comment

      Adsense Classic 2

      Collapse
       

      Preventative Maintenance - Brunswick All - Bearing Life

      In relation to the recent “B Shaft” failure, I thought I would throw this subject on the table for discussion. I remember when I attended a “Bearing Life” seminar long...
       

      Preventative Maintenance Brunswick A Jets A2 - SC/Dk Pulley Assembly

      Found a bad left needle bearing in the Scissor / Deck Cable Assembly at the Rear Wall House. Needle Bearings are falling out and there is a pile of metal under it. Been 30+...
       

      Preventative Maintenance - Brunswick B-10's Hollar House

      Took a trip back in time to the classic “Hollar House”. The lanes went in in 1908. There was no ABC but according to the current operator, Tom, it became sanctioned when...
       

      Table support assembly

      My night at part job all 32 lanes going of leagues no where to move. Table support assembly broke rod broke # 2 Cell and bent the heck out of wire channel. Changed the Cell,...
       

      Foul Light LED Mod

      Here is a mod I came up with for a foul light unit. I was able to remove the old indicator light bulbs and replace them with ultra bright white LEDs. This should work for about...
      Working...
      X