Announcement

Collapse
No announcement yet.

Need patterns for Brunswick A22 lane machine for synthetic lanes

Collapse

Adsense Classic 1

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Need patterns for Brunswick A22 lane machine for synthetic lanes

    I am posting for another center who is looking for patterns for Brunswick A22 lane machine. This center has DBA IQ synthetic lanes. The owner has applied for membership to bowltech and is waiting for approval. But, needs this ASAP.
    Howard

  • #2
    brunswick has patterns on there web site . pattern manager

    Comment


    • #3
      Yes, A22 patterns are here with guidance:

      http://www.brunswickbowling.com/prod...lane-patterns/

      Comment

      Adsense Classic 2

      Collapse
       

      Preventative Maintenance - Brunswick All - Bearing Life

      In relation to the recent “B Shaft” failure, I thought I would throw this subject on the table for discussion. I remember when I attended a “Bearing Life” seminar long...
       

      Preventative Maintenance Brunswick A Jets A2 - SC/Dk Pulley Assembly

      Found a bad left needle bearing in the Scissor / Deck Cable Assembly at the Rear Wall House. Needle Bearings are falling out and there is a pile of metal under it. Been 30+...
       

      Preventative Maintenance - Brunswick B-10's Hollar House

      Took a trip back in time to the classic “Hollar House”. The lanes went in in 1908. There was no ABC but according to the current operator, Tom, it became sanctioned when...
       

      Table support assembly

      My night at part job all 32 lanes going of leagues no where to move. Table support assembly broke rod broke # 2 Cell and bent the heck out of wire channel. Changed the Cell,...
       

      Foul Light LED Mod

      Here is a mod I came up with for a foul light unit. I was able to remove the old indicator light bulbs and replace them with ultra bright white LEDs. This should work for about...
      Working...
      X