Announcement

Collapse
No announcement yet.

stonehenge

Collapse

Adsense Classic 1

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • stonehenge

    is the stonehenge land mark pattern just foe the flex?
    Good work is not cheap and cheap work is not good

  • #2
    It looks like you could run it on a regular Kegel machine. It only uses 1 cartridge and does not vary the stream volumes. Cleaner mix ratio is the same for both front and backend.
    let me be myself

    Comment


    • #3
      thank you
      Good work is not cheap and cheap work is not good

      Comment

      Adsense Classic 2

      Collapse
       

      Testing Link Belting "PowerTwist Drive"

      Recently got my hands onto some meters of these: http://www.fennerdrives.com/powertwi...Drive-A/13/4L/

      At first let me tell you that they are pretty sturdy and very...
       

      Ion buffer brush

      Have Kegel ion model B. Noticed the buffer brush rubbing up against the felt that's attached to the oil transfer assembly (the "door" you open to fill the tanks). This...
       

      Preventative Maintenance - Brunswick A / A2s - Rearwalls

      James asked for pics of the rear walls. A mechanics nightmare !!! Going to need to loose some weight before working behind these babies. Note: the Rear Low volt control switch...
       

      Brunswick/Kegel tongs...

      Just noticed that Brunswick and Kegel tongs are different where you line them up for timing has anyone noticed this am I missing something?...
       

      C1 Pinout drawing

      Finished the C1 drawing.

      The base for this came from a drawing made by Felix dated 2006.

      Thanks Felix.




      If you see any...
      Working...
      X