Announcement

Collapse
No announcement yet.

Sticker coin parts

Collapse

Adsense Classic 1

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Sticker coin parts

    I have a sticker/tattoo vending machine and I am looking for a part that doesn't allow quarters to be put in certain spots of the coin acceptor. Any suggestions as to of where I can find some would help greatly.

  • #2
    google (suzo happ) blank inserts for coin chutes

    Comment

    Adsense Classic 2

    Collapse
     

    Preventative Maintenance - Brunswick All - Bearing Life

    In relation to the recent “B Shaft” failure, I thought I would throw this subject on the table for discussion. I remember when I attended a “Bearing Life” seminar long...
     

    Preventative Maintenance Brunswick A Jets A2 - SC/Dk Pulley Assembly

    Found a bad left needle bearing in the Scissor / Deck Cable Assembly at the Rear Wall House. Needle Bearings are falling out and there is a pile of metal under it. Been 30+...
     

    Preventative Maintenance - Brunswick B-10's Hollar House

    Took a trip back in time to the classic “Hollar House”. The lanes went in in 1908. There was no ABC but according to the current operator, Tom, it became sanctioned when...
     

    Table support assembly

    My night at part job all 32 lanes going of leagues no where to move. Table support assembly broke rod broke # 2 Cell and bent the heck out of wire channel. Changed the Cell,...
     

    Foul Light LED Mod

    Here is a mod I came up with for a foul light unit. I was able to remove the old indicator light bulbs and replace them with ultra bright white LEDs. This should work for about...
    Working...
    X