No announcement yet.

potential relay


Adsense Classic 1

  • Filter
  • Time
  • Show
Clear All
new posts

  • potential relay

    Hey guys need a little help replacing s s switch on sweep motor to a potential research said to use # 1-2-5 connection on relay but not sure on the wiring instructions.Westinghouse motor on 8270 pinsetter and MP chassis.

  • #2
    Red wire from the plug goes to # 1 on the relay
    # 6 on the board goes to # 2 on the relay
    # 4 on the board goes to # 5 on the relay

    A person who never made a mistake never tried anything new.
    - Albert Einstein


    • #3
      thanks for the help DarkDays I got it on and running.


      Adsense Classic 2


      Related Topics



      Detector Rod Adjustment

      I am currently doing my first detector rod adjustment. The first thing the book tells you to do is adjust the gap between the oor controller and the blocking surface on the detector...

      The New Brunswick NXT

      Best Pinsetter on the market today

      Distributor Repair Kit

      Has anyone installed a dist. repair kit ? Wanted to know if its a fix to the problem or just a brunswick brand Band-Aid....

      Preventative Maintenance - Brunswick A, Jets, A2 - Wiring Problems

      Had to do a service call at a friend's center as he was out of town. Seems Accelerator on 5 & 6 had quit. Breaker, (which fed 3 pairs), had not tripped, ohm check on motor...

      Preventative Maintenance - A Jets A2 - Pinsetter Procedures

      Over the years I've compiled info in a 3-ring binder for quick reference. I decided to add a bunch to it and make one for a few of my friends including the rear-wall house. ...