Announcement

Collapse
No announcement yet.

8270 stuck in NPR mode

Collapse

Adsense Classic 1

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • 8270 stuck in NPR mode

    been looking around but can't find ANY earlier posting re: a "NPR" problem on 8270's. I'm pretty sure that's what i'm dealing with right now. Machine will NOT cycle.......sweep will NOT run pressing sweep run on chassis.........will NOT run engaging SA............will NOT run engaging sweep run toggle switch on Mgr control box either. ONLY power to sweep motor is through relay in chassis. I've removed the wires from terminals 5 & 6 in A&MC box and problem is still there. Any ideas ??? Thanks...

  • #2
    Is it in instructomat? That what it seems like to me.

    peter

    Comment

    Topic Starter RibbonScript

    Collapse

    Adsense Classic 2

    Collapse

    Related Topics

    Collapse

     

    Broken key



    Recently had to overhaul a Jap A2 gearbox. I found this shattered key to be the cause of the problem.
    Anyone wanting to have a guess at

    A) Which...
     

    MONITOR COLOR ISSUE!!

    my appologies if Ive posted this in the wrong area, this is my second post on this site, Ive got a 10 lane center ( 5 pairs ) and on lanes 3&4, I am having a problem with...
     

    Pin spot is off

    I'm currently working at a 38 Lane center. Of those 38 lanes only a few are having this issue.

    I'm currently trying to get all the lanes to have perfect pin spots...
     

    Idler shaft

    One of our lanes has a bad bearing assembly for the distributor pulley. The idler shaft that the pulleys sit on has been damaged where it sits on the bearing. I took the assembly...
     

    4" PVC BOW EXTENDERS

    As requested a couple pics and detail of my setup. I started installing these 2 years ago after I got tired of those rubber hose extenders that would just bend. I watched and...
    Working...
    X