Announcement

Collapse
No announcement yet.

Part number

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Part number

    Good afternoon,

    Does anyone know what the part number is for the roll pins that hold the brake on the 90 style combo motors. I’ve got the earlier style 090004060. I’m going back through and putting the original brakes back in them as I’ve had an after market version installed and the roll pins were removed.

    cheers,

    Peter

  • #2
    You're local hardware store should have them. Bring the part along with you and find one that fits.
    There! Try to NOT work now!

    Comment


    • #3
      I’ve managed to work it out. It’s 913415120bg if anyone needs it for themselves

      Peter

      Comment

      Topic Starter RibbonScript

      Collapse

      Adsense Classic 2

      Collapse

      Related Topics

      Collapse

       

      Preventative Maintenance - A Jets A2 - Elevator & Pits

      All this work just to clean under the elevator !!??? LOL A friend is replacing a number of his elevators as the left hand triangle plate brackets are breaking. Rather than...
       

      Preventative Maintenance - A Jets A2 - Ball Wheel Belt Question

      A friend was looking at his ball wheel belt which stated it was 208" long, (Pic 1). He was pretty sure that it is a B205 belt which should be 205" long. The answer...
       

      MONITOR COLOR ISSUE!!

      my appologies if Ive posted this in the wrong area, this is my second post on this site, Ive got a 10 lane center ( 5 pairs ) and on lanes 3&4, I am having a problem with...
       

      Pin spot is off

      I'm currently working at a 38 Lane center. Of those 38 lanes only a few are having this issue.

      I'm currently trying to get all the lanes to have perfect pin spots...
       

      Idler shaft

      One of our lanes has a bad bearing assembly for the distributor pulley. The idler shaft that the pulleys sit on has been damaged where it sits on the bearing. I took the assembly...
      Working...
      X